The Arriflex 16BL requires 12VDC to operate. I've used it with battery belts up to 14V with no problem (a freshly-charged NiCad Battery belt measures 14.4V).
The standard 4-pin XLR Wiring Configuration is 1=Black, 4=Red, Pins 2 & 3 are NOT used.
Good luck!
:-J
Hello,
I have a Arriflex 16 Bl, but no have a battery pack, or a power supply. In the camera at control unit, I connect the correct multipin cable, but in the end of the cable I have a male conector with 4 pins.
¿ Anybody knows wich voltage I need to apply in all the four pins to fed the camera correctly. Or anybody have a schematic diagram, or electronic schema ?
Arriflex 16 BL. power unit
in 16mm
Posted
The Arriflex 16BL requires 12VDC to operate. I've used it with battery belts up to 14V with no problem (a freshly-charged NiCad Battery belt measures 14.4V).
The standard 4-pin XLR Wiring Configuration is 1=Black, 4=Red, Pins 2 & 3 are NOT used.
Good luck!
:-J