Jump to content

Bill DiPietra

Premium Member
  • Posts

    2,369
  • Joined

  • Last visited

Posts posted by Bill DiPietra

  1. Hey Hunter - I liked your film. But I would definitely put it in the experimental genre. I thought you made great use of reflections & lens flares. You had some very interesting techniques in there. Other than the framing issue, I think it was a nice piece.

  2. I have a 2592. Is it shuttering and jumping on the bottom part of the frame? The filmstrip was probably slightly misaligned when you put it into reverse but should have returned to normal when you put it back into forward.

     

    Have you tried to put any film through it since then?...

  3. So, after a more throughout check, I’ve determined that the issue lays solely with the viewfinder extension. Since the prongs on all of the ARRI viewfinders only allow for two different positions (180 degrees in one direction and 180 degrees in the other,) I tried both positions with the extension and both positions with only the standard viewfinder.

     

    When I used the extension, the circular obstruction appeared on the RIGHT part of the frame, but the left side of the frame was clear (see “A” below.) When I removed the extension, turned it 180 degrees, and attached it again, the obstruction appeared on the LEFT side of the frame and the right side of the frame was clear (see “B” below.)

     

    post-45-0-86602200-1480391094_thumb.jpg

    A.

    post-45-0-13923600-1480391111_thumb.jpg

    B.

     

    When I used the exact same process with the standard viewfinder, I had no issues. It’s almost as if the barrel of the extension is partially closed or something.

     

    Here is a picture of the viewfinder extension:

     

    post-45-0-53005700-1480391129_thumb.jpg

     

    And here is a closer view of what looks like two small levers.

     

    post-45-0-39305400-1480391139_thumb.jpg

     

    I’m not sure if those do anything and I don’t want to start unscrewing things. So if anyone can offer any advice, I’m all ears. The seller is very fair, so the worst-case scenario is a refund. But I’d rather solve the problem.

     

    Thanks for any help.

  4. Hi everyone. I recently purchased the extension viewfinder for my Arriflex SR-II. I attached it today and noticed a circular obstruction on the frame lines (enough to be a problem.) I screwed it on and off multiple times and the obstruction appeared in different areas of the frame (corner, sides) each time.

     

    When not using the extension, the viewfinder is fine. So my only guess is that this could be due to the fact that my camera is S16?...

×
×
  • Create New...