SteadicamForum

I'm selling a fresh out of the box, never been used, GPI PRO Telescoping Monitor Arm & Post Clamp Assembly. 25 percent price cut from brand new. Telescoping Monitor Arm $900 Post Clamp Assembly $336 Attached Images View or reply to the original post at SteadicamForum.com

I have the dovetail plate shown.. i think it might be PRO? or??? looking to trade for an EFP plate. this is slightly too wide for the EFP top stage. i have a mill and could just cut to fit, but that seems a bit barbaric since someone here might have an older unused plate sitting around and could use a second plate of this variety. I am not sure what it actually goes to as i was told it was for the EFP when i bought it, and that does not seem to be the case. thanks david Attached Images View or reply to the original post at SteadicamForum.com

BNC connection has come loose but otherwise works fine $800 Australian Dollars + postage View or reply to the original post at SteadicamForum.com

Inovativ Umbrella Clamps 1.25" Fits Echo, Ranger and Scout carts Like new and asking $170, free domestic shipping New list $219 View or reply to the original post at SteadicamForum.com

Used Master Series vest. Machined out for weight reduction. A great vest for the money. $1850 johnatkinson3@mac.com View or reply to the original post at SteadicamForum.com

Brand new, never used. I ended up using the video style plates, so never needed this one. $80 johnatkinson3@mac.com View or reply to the original post at SteadicamForum.com

Two units, Camwave WEVI HDSDI. Modified for 23.98/24P. Recently converted to Gold mount, but will include plug and play V mounts. Also, Aja DA signal boosters for added range. Great for ENG cameras, steadicam, jib. These are HDSDI and are rated for a 100ft. Receivers can be coupled. Misc. cables included. $700each or $1250 for both all in! Johnatkinson3@mac.com View or reply to the original post at SteadicamForum.com

I bought this to replace top stage on MK-V rig, but I ended up fixing my top stage. This is new, never used. Great top stage for any rig! $2500 johnatknson3@mac.com View or reply to the original post at SteadicamForum.com

Modified Pro I sled. 3A gimbal with MK-V grip, Gold battery mounts, cables and 2-camera plates. Excellent 1st big rig for low price!! $6500 Johnatkinson3@mac.com View or reply to the original post at SteadicamForum.com

<p>All pictures are on the Facebook Steadicam RENT SELL BUY</p> <p> </p> <p>All items purchased and PAID for BEFOREHAND can be delivered in the afternoon at the Stabilizer expo on Sunday OR Shipped tomorrow at the Buyers expense.<br> The following is being offered for sale together at this time.</p> <p>Oppenheimer Camera Handle w/short post USED<br> Microforce V+F SN #94775 USED<br> Microforce Arri 24V Cable #1121 Fisher 3 pin 24Volt. ( All Arri 24V cameras) USED<br> Heden M26T Zoom Motor w/Angled 15mm bracket USED<br> The 4 items above $1500.</p> <p> </p> <p>Preston HU2 #2635 USED<br> FI+Z Transmitter 2 #49795 w/ omnishot adapter (for small sony batts not included), 2 antennas<br> 8 marking discs<br> Preston Battery Fast charger, 2 OEM USED batteries<br> Charging cable<br> the above $600.</p> <p> </p> <p>Stand Alone Preston Fast Charger with power cord $60</p> <p> </p> <p>Hill products Uni Clamp kit<br> The Uni-Clamp has all the functions you need. Mounts on all three sizes of iris rods, (15mm, 5/8″, 19mm) “No Reducers needed.” Kit includes Motor Rosette, D-Clamp and Arm.<br> 2 Available $230 each as shown</p> <p> </p> <p>Stanton Gimbal Clamp for use with their lens control handle<br> black standard version for up to 1" in diameter gimbal arms $50</p> <p> blue/gray version for up to 1.250" diameter gimbal arms $60</p> <p> </p> <p>Short standard XCS gimbal handle USED $250.</p> <p> </p> <p>J7 Zoom/Focus control Used.. $700<br> comes with the cable jumpers to plug the focus control right into the POT input on a Bartech receiver, and the jumper for a Canon Zoom lens. I will also throw in a cable that already has the Fujinon connector but you have to swap out the opposite end connector to mate with the connector needed.<br> NOTE: The Zoom rocker works fine but does not have the wing for your thumb to rest on.</p> <p> </p> <p>Switronix Recon HD/SDI/HDMI 1:2 system<br> All calibrated at Switronix within the last 7 months.<br> All parts AB Mount.<br> Transmitter SN# ML33120124<br> with HD/SDI input, loop thru as well as the HDMI input<br> 2 Receivers SN#ML33120124 &ML33060073 with HD/SDI out and HDMI out. 3 sets of antennas (2 std and one paddle style)<br> 1 AC power supply for either of the receivers<br> 1 padded square carry case that can fit 1 TX, 1 Rx , antennas and the power supply.</p> <p>Switronix set up$1500.</p> <p> </p> <p>Digital Motor Cables...</p> <p>straight ends $125 each<br> 1 each size available 25.75", 26", & 26.5"</p> <p>27" Right Angle both ends $160</p> <p>Heden motor cable 7pin male to 5 pin male $50</p> <p> </p> <p>Power cables</p> <p>Preston Microforce Zoom to FI+Z HU2 cable ( Not for Digital Microforce) 13" Tip to Tip. $100.</p> <p>Preston Arri 24Vdc to MDR2 power #4499 26" tip to Tip $150</p> <p>non preston Arri 24Vdc to MDR power 26.5" Tip to Tip $125</p> <p>Preston XLR4 12 V to MDR2 power cable #4461 7ft long $100</p> <p>18.5" Arri 11 pin fisher to Coherent 4 pin male connector $35</p> <p> </p> <p>RUN Cables<br> All Preston for MDR2<br> 24" Genesis #4533 RA on one end, Straight on the other $90 each, 2 available<br> 26" Aaton #4524 Straight both ends $65<br> 27" Arriflex/Moviecam #4521 3 pin Straight both ends $110<br> 26" Panavision #4522 Straight both ends $90<br> 24" Sony VTR #4435 Straight both ends $110</p> <p>MDR2 mounting bracket with dovetail to fit the GPI/PRO Donkey Box dovetail MDR bracket. With screws $130.</p> <p>Mounting rod for the MDR2, Lets you mount this rod to one side of an MDR2 and then slide it into any 15mm rod holder. $40.</p> <p> </p> <p> </p> <p> </p> <p>Thanks,</p> <p>Ozzie</p> View or reply to the original post at SteadicamForum.com

selling a Generation 1.5 Teradek Bolt Pro SDI Set. Latest Firmware, working properly. The transmitter has the internal battery which the lates bolt generation is missing. Very useful in terms of battery change or power problem solving. On top it is much smaller and lighter which is the same for the receivers, which are the improved gen1 version with passive cooling (no fan). Set includes: 1x TX 2x RX 1x PowerTap Cable 1x Power Suply 1x Hardcase Located in germany. 1850 Euro +shipping View or reply to the original post at SteadicamForum.com

Hello, due to personal and professional reasons I need to put my rig for sale Sled MK-V Nexus Arm G-50 Vest Ultra 2 Monitor IIIA Zoom remote Zoe-3 Cables for Bartech and Chrosziel All equiment, not in good conditions, in PERFECT ones, and storage price: 23000€ Located in Barcelona Interested mail me please and I'll send pictures Thank you View or reply to the original post at SteadicamForum.com

Easyrig 2.5 500N Stabilizing Camera Support w/ Adjustable/Extended Arm very light use, minor scuffs perfect working order serial no. 4061A For Use w/ 22-30 lb (10.0-13.6 kg) Cameras Extended/Adjustable bar has a maximum length of 17 in (43 cm) and an adjustment range of 8 in (20 cm) Designed for Longer Handheld Camera Rigs Transfers Most of Camera Weight to Hips Prevents Shoulder/Back Strain great for MOVI or Ronin $2,200 or best offer shipping is $40 Attached Images View or reply to the original post at SteadicamForum.com

A reluctant sale of my Bartech remote focus kit. I'm selling my entire steadicam kit with a change of direction for my work so it's all up for grabs. This is a very complete kit that can go to work right away. HedÈn M28VP with .4 .5 .6 .8 gears M-One with .4 .5 .6 .8 plus spares (plus extra wide .8 gear) HedÈn M26P (this is the older style horizontal motor, nice back up if nothing else) Aaton to BFD power Aaton camera run Panaflex to BFD power+camera run Glidecam BFD power 4 x motor cables Right angled motor cable BFD to BFD piggyback short BFD to BFD piggyback long Dtap and 4 pin XLR power cables 24v Arri / Movicam power / run cable Arri 12V to BFD power Red camera remote run Data cable / hard wire for backup in case of interference. 2 x butterfly clamps to hold focus / iris units together. 2 x neck straps Case Extra white marking strips PHOTOS: http://losangeles.craigslist.org/sfv/pho/5611631928.html Kind of bummed to sell this kit but I don't use it so time to let it go. It's pretty bloody rock solid and has never let me down. I spent an enormous amount of cash on this kit, feels like a crime to let this go but such is life! Thanks. Attached Images View or reply to the original post at SteadicamForum.com

Well, the time has come to part ways with my love! I'm selling off all my steadicam kit. I've throughly enjoyed myself but work has me in a different direction and it's pointless having all this kit sitting in boxes. I'm selling my Glidecam GOLD 2inch post sled, arm and vest along with all the other bits I have kicking around. Also selling my Bartech system in a seperate ad. I did mostly live tv work and commercials, this rig has been a killer system, I'll miss her. Here is a link to the official Glidecam site for all the specs and tech talk: http://glidecam.com/product-gold-sled #NOTE# My sled has the 'anton bauer' base with V-Lock plates. Included in sale: SLED ARM VEST Docking bracket (no stand) 2 x pelican 1650 cases. The sled case has a removable lid for tools and spare bits. Everything in the photo is included, tools, cables, talley light etc - (the two blue cases aren't included, they are part of a Vocas kit, I just forgot to take them out for the photo!) Blue wedge plate with Sony VCT plate Jerry Hill hard mount - BRAND NEW, never used Spare vest ratchets NEW x 4 Spare yellow wedge plate Triax header cable 2 x extra docking stands - I used on on my magliner Marell 3 way bubble with elastic strap Low mode cage Padded arm bag Collapsable wind break, custom made with clear viewing panel Extended post for arm - get that extra length you've always wanted Tally for Sony cameras - use the viewfinder plug various BNC cables and a sled to 4pin XLR cable for monitor I'm throwing in a Marshal 7inch LCD. I think this monitor is a piece of crap but I have no use for it so I'll chuck it in. It'd be fine to throw in the kit as a back up but it's only good for indoor situations. (piece of poop!) My heart breaks a little to see her go but it's time. Kit is located in LA and can be viewed in person. Let me know any questions you might have, leigh@loosecannon.com.au Thanks. PHOTOS: http://losangeles.craigslist.org/sfv/pho/5611611617.html Attached Images View or reply to the original post at SteadicamForum.com

Boxx Meridian Professional Transmitter and Receiver for sale. Excellent condition. Comes with Nanuk case, white square receiving antenna, AC/DC power converter, cables, extra antennas. Just brought in to the Boxx service centre to be inspected for sale - verified in perfect working order. $6800 USD. I have 2 of these units for sale. View or reply to the original post at SteadicamForum.com

<p>Here are some very nice useful items. </p> <p> </p> <p>1 Zacuto Jeep 15mm/19mm rod adapter to adapt 100mm spacing to 60mm spacing $150</p> <p>1 Lee Utterbach 15mm Adjustable Rod Adapter, Adjustable Vertically and Horizontally $100</p> <p>1 pair 18" 15mm Heavy Duty Aluminum Rods, Very Sturdy $75</p> <p>1 pair 8-3/4" 15mm Heavy Duty Aluminum Rods $50</p> <p>Cintronics Digi-Tach for Arri SR1 and AR2 Cameras Very nice digital speed control $250</p> <p>Arri Speed Control for SR1 and SR2 Cameras $100</p> <p>Original Arri NCL SRIII NiCad Battery Charger for SR1 or SR2 NiCad Batteries</p> <p>Transvideo Frame Line Generator $100</p> <p> </p> <p>Contact me if you are interested.</p> <div id='attach_wrap' class='clearfix'> <h4>Attached Images</h4> <ul> <li class=''> <a class='resized_img' rel='lightbox[117960]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-70615100-1464588402.jpg"title="IMG_0368.JPG - Size: 125.7KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-70615100-1464588402.jpg" class='bbc_img linked-image' alt="IMG_0368.JPG" /></a> </li> <li class=''> <a class='resized_img' rel='lightbox[117960]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-13836100-1464588417.jpg"title="IMG_0355.JPG - Size: 78.85KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-13836100-1464588417.jpg" class='bbc_img linked-image' alt="IMG_0355.JPG" /></a> </li> <li class=''> <a class='resized_img' rel='lightbox[117960]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-14525600-1464588430.jpg"title="IMG_0356.JPG - Size: 76.88KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-14525600-1464588430.jpg" class='bbc_img linked-image' alt="IMG_0356.JPG" /></a> </li> <li class=''> <a class='resized_img' rel='lightbox[117960]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-64536900-1464588448.jpg"title="IMG_0357.JPG - Size: 75.19KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-15605-0-64536900-1464588448.jpg" class='bbc_img linked-image' alt="IMG_0357.JPG" /></a> </li> </ul> </div> View or reply to the original post at SteadicamForum.com

This one of Janice Arthur's 11 lb Weigh Plates for Sale. $80 It is very well made and has a silky smooth surface. Attached Images View or reply to the original post at SteadicamForum.com

This is a very nice Arri SR2 High Speed Super 16 PL Mount Camera Package for sale. It includes: Arri SR2 High Speed Camera body with Cinema Electronics Digital Speed Control Upgrade 1 Canon 8-64 T2.4 Super 16 Zoom Lens 3 Super 16 High Speed Mags Video T-Bar with B&W Video Camera with cables 2 Right Hand grips different styles 1 Articulated Left/Right Hand grip with Dog Bone 1 Arri BP-7 Sliding Base Plate with 18" Arri 15mm Rods 2 Sets of Lightweight Front Rods 1 Arri Eyepiece Extension 1 On/Off switch extension cable 5 onboard batteries, One has been upgraded to NiMh batteries. The other 4 need to be re-celled 2 Original Chargers 1 Tenergy TB6-AC4 NiMh Charger with adpters for Arri Batteries 1 Bescor Battery Belt 3 Cases, one for Camera with one Mag, one for 3 Mags, and one for the lens 1 Leather Sound Barney Original Instruction Manual and The 16SR Book Original internal Light Meter and misc. Parts and cables The price is $3,500 I will sell the Camera, Lens, and Accesories separately. Make me an offer if you are interested. Attached Images View or reply to the original post at SteadicamForum.com

<p>Cinema Products Socket Block -- $250</p> <p> </p> <p>Ship or pick up in Brooklyn. PM if interested. </p> <p> </p> <p><a class='resized_img' rel='lightbox[117957]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-23069800-1464564452.jpeg"title="20160529_191809.jpeg - Size: 322.99KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-23069800-1464564452.jpeg" class='bbc_img linked-image' alt="20160529_191809.jpeg" /></a> <a class='resized_img' rel='lightbox[117957]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-72984800-1464564442.jpg"title="20160529_191655.jpg - Size: 124.46KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-72984800-1464564442.jpg" class='bbc_img linked-image' alt="20160529_191655.jpg" /></a> <a class='resized_img' rel='lightbox[117957]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-94052600-1464564433.jpg"title="20160529_191603.jpg - Size: 108.48KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-94052600-1464564433.jpg" class='bbc_img linked-image' alt="20160529_191603.jpg" /></a> <a class='resized_img' rel='lightbox[117957]' id='ipb-attach-url-' href="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-59430600-1464564424.jpg"title="20160529_191550.jpg - Size: 86.34KB"><img itemprop="image" src="http://www.steadicamforum.com/steadi-uploads/monthly_05_2016/post-13287-0-59430600-1464564424.jpg" class='bbc_img linked-image' alt="20160529_191550.jpg" /></a> </p> View or reply to the original post at SteadicamForum.com

Hi guys, Selling a Flycase 80 x 40 x 16 cms. Barely used and in perfect shape. 275€ Located in Barcelona (Spain) Buyers will pay shipping and taxes Attached Images View or reply to the original post at SteadicamForum.com

Breaking up My Package for sale. I'm going to start with the Sled. Nice Pro 2 Sled Donkey Box 3 Pro VZ Gimbal Tool less Pro Center Post with Kip Handle Pro Battery Module 2 with 3 jumper Blocks Recorder Mount Picture includes TB6 Monitor BUT that is not included with sled. Monitor sold separately Batteries are not included Buyer Pays Shipping Since this is from my package I listed to sell, I'm willing to negotiate other items to go with the sled for additional cost (Case, Dovetail Plates, Docking, etc) Asking $12,000.00 I'm in Atlanta Thanks, Michael 818-207-8156 Attached Images View or reply to the original post at SteadicamForum.com

Selling LX vest. Like New condition. $2900 OBO Contact David (at) David M Aronson.com (no spaces) US and Canada only. Split paypal fees 50-50 View or reply to the original post at SteadicamForum.com

Selling an HD Anton Bauer Zephyr. Lived in a single studio most of it's life. 2" 3D printed grip and 3d printed monitor yoke added by it's previous owner. It has a few dings and scuffs, mechanically it's perfect. Contact David (at) David M Aronson.com (no spaces) $7200 OBO. US and Canada only. Split paypal fees 50-50 Includes: Sled Arm Vest 3 pin lemo to 4 pin xlr cable 4 pin hirose to 4 pin xlr and bnc monitor cable screw on sled weights dovetail plate 1/4" and 3/8" mounting screws Hard Thermodyne case docking bracket Stand not included View or reply to the original post at SteadicamForum.com

Selling my PRO Generation 2 steadicam. Rig was very well maintained and is in excellent condition. Minor signs of wear. Package includes: PRO VZ Gimbal Generation 2 donkey box HD/Analog Upper/lower junction boxes Tool less extendable 1 and a half inch post Generation 2 Battery hanger with 3 jumper blocks XCS Telescoping monitor bracket 2 2-inch docking collars for regular and low mode XCS dovetail plate 2 auxiliary power cables straight and right angle 2 camera power cables straight and right angle 1 monitor cable with an open end Jerry Hill Auto Dock with tilt capability Custom Storm Case M2975 Located in New York/New Jersey Buyer pays shipping Asking $17,000 View or reply to the original post at SteadicamForum.com