Paul D Williams
-
Posts
7 -
Joined
-
Last visited
Posts posted by Paul D Williams
-
-
Hello,
I had one made by Lee Gaither at Custom Upholstery Products for my ACL 2 (picture attached). It's custom made and fits the camera perfectly with a 400' magazine. DM if you're interested.
-
1
-
-
DMs to paul@sgfilms.com.au
-
FOR SALE: Aaton XTR super 16mm camera kit
Aaton XTR camera SN c1709 PL mount, Aatoncode, Exposure reading
3 x 400” DX Magazines SN M4974, M3784, M3801
3 x magazine throat protectors
Cinematography Electronics Intervalometer SN 6413 + cable
Aaton walnut handgrip + cable
NP1 battery adaptor
15mm rails/handgrip adaptor
Aaton mount spare, other loose parts
Origin C+
2 x 15.6 V 3 Ah Aaton batteries ( recelled 3 years ago - all holding charge)
4 x 12 V Aaton batteries ( recelled 3 years ago - all holding charge)
ICE Film Equipment LTD TOP C/D 16V/12V Aaton battery charger (charges 3 batteries at once)
Harrison Film Changing Bag
Extension eyepiece (Tillhor Sveriges Television AB 880871 K399)
Rollerbox Aluminium case (fitted for camera)
More photos of the camera and footage shot with this camera can be seen here: https://www.dropbox.com/sh/h4xxlmtikpidtf6/AABgjHcTbE41VOt6XG4KvvC1a?dl=0
This is a very lightly used Aaton XTR, that's in exceptional condition. There is no video split installed but one can be installed by AZ Spectrum in NYC, USA and elsewhere.
I'm selling as I don't have cause to shoot 16mm these days. The camera is located in Perth, Australia but can be shipped worldwide. The kit is fully operational. The kit was never rented, and has been my personal camera.
Asking price $AUD12,000
-
Hello, camera still available. PM me to discuss further.
-
Hello,
I have a super16mm Aaton XTR with 3 x 400' magazines. It has been very lightly used and has been owner-operatored (me). It's in excellent condition. PL-mount Extension eyepiece. Aatoncode. Origin C+. 1:1.85 GG. No video split installed.
It is located in Perth, Australia, so not ideal for you in Germany, but it can be shipped.
Serial No. C1709, sometimes referred to as the XO configuration.
Let me know if you're interested and I can post some more pictures or Skype.
I'm selling because I moved into directing and just don't get to use it now.
Regards,
Paul
-
1
-
-
Hi,
has anybody else encountered this problem when using the Aaton Penelope in 2 perf configuration using Kodak 5222 or any other film stock for that mater? (See below)
This is happening in the middle of takes, while the camera is running so it's not a gate check then re-raking issue. The camera wasn't making tell-tale "problem" noises.
We shot 12 rolls. The issue is across all 3 mags used but got progressively worse as the shoot went on. The tendency is for more instances towards the tail of the rolls. The heads are OK.
It didn't happen on roll #1. Roll #2 22 times. #3 3 times. #4 5 times. #5 1 time. #6 +25 times. Then things go crazy. This from the lab:
Roll 7 goes out of frame 5 time every foot throughout roll (with the 3rd perf) . At about 36 ft from tail it is almost a continuous 3 perf going out of frame 16 time every foot.
Roll 8 is good for about 75 ft then it starts going out of frame (with the 3rd perf). It starts out 1 every 18 ft to 10 every foot.
Roll 9 is good for about 25 ft then it starts going out of frame (with the 3rd perf). It starts out 3 every foot to 8 every foot throughout.
I haven't got the report for rolls 10-12. I expect the worst.
Any thoughts?
Thanks in advance
Paul
FOR SALE: Aaton XTR Super 16mm camera kit
in Cine Marketplace
Posted
SOLD.