Jacob Robinson

I can't say for certain but I suspect not. I think the width of the rear element is the issue rather than the depth. It did fit on a Kish 16mm viewfinder.

I did not. I looks like the rear, whilst clear of the mirror comes into contact with the ground–glass block on the prod

For those interested the 20mm PL does not fit the Aaton XTR Prod or LTR.

On 11/2/2023 at 10:38 AM, David Sekanina said:

Loawa announced a 20mm 1.5X Nanomorph:

https://laowacine.com/product/nanomorph-20mm-t2-2-mft/

I checked again if the 20m (white) is also within the ARRI Studio envelope (blue), and it is ?

It'll cover S16 nicely, but not S35.

 

31.16 – 31.50 that is very tight! Is there any danger of hitting the mirror? 

Looking to try this on a XTR Prod

Thanks David. You don't happen to know the depth of the mirror on the Prod do you?

Thanks Brian! Now I need to source one...

good chat

On 11/2/2023 at 10:38 AM, David Sekanina said:

Loawa announced a 20mm 1.5X Nanomorph:

https://laowacine.com/product/nanomorph-20mm-t2-2-mft/

I checked again if the 20m (white) is also within the ARRI Studio envelope (blue), and it is ?

It'll cover S16 nicely, but not S35.

 

31.16 – 31.50 that is very tight! Is there any danger of hitting the mirror? 

Looking to try this on a XTR Prod

Adriano did you manage to see a serial number?

Hi,

how much is the lens?

cheers,

Jacob

Hi Matt, here's some Super Speeds in LA.

Hi,

I've recently acquired an Aaton LTR 7 and was wondering if it was possible to fit a variable shutter in the LTR to allow flicker free filming at 24fps in 50hz countries?

I know some lights will be fine, my concern is practical lights which will pulse with a 180˚ shutter at 24fps.

Thanks,

Jacob