Search the Community
Showing results for tags 'maintenance'.
-
Hi everyone I've been rebuilding an early 50's vintage H16 which was completely frozen, and so far I've dissembled the camera, cleaned it, obtained new parts where needed, and have actually reassembled the workings. It runs! And yes, I have a repair manual which has been essential to this project. I realize there's much more to it like alignment and adjustment, but until the camera is film tested can it be determined if the rebuild was a success. And I do intend to use it once this is done. This camera will compliment my vintage H8 and REX1. The REX was professionally serviced. Anyway, thank you for staying with me, now if anyone has tips, advice, sources, parts, etc, please, anything would be appreciated. Right now, I'm looking for light seal materials. My supplier informed me sealing material for older cameras is no longer available, but didn't elaborate on substitute materials or methods. If anyone has information, how to, or advice, please and thank you! Also, are there special lubricants for the Bolex? If so, what type? Are they easily available? And what substitutes an be used? Well, thank you folks, I intend to get this camera running, and I have discovered that taking it apart was a challenge but was easier than I thought; and putting back together isn't that hard. The challenge is the adjust, sync and alignment. I sincerely thank each and everyone one of you who respond with anything, including stories and anecdotes about using these great cameras Cheers Gil in Washington DC USA
-
Hi everyone I've been rebuilding an early 50's vintage H16 which was completely frozen, and so far I've dissembled the camera, cleaned it, obtained new parts where needed, and have actually reassembled the workings. It runs! And yes, I have a repair manual which has been essential to this project. I realize there's much more to it like alignment and adjustment, but until the camera is film tested can it be determined if the rebuild was a success. And I do intend to use it once this is done. This camera will compliment my vintage H8 and REX1. The REX was professionally serviced. Anyway, thank you for staying with me, now if anyone has tips, advice, sources, parts, etc, please, anything would be appreciated. Right now, I'm looking for light seal materials. My supplier informed me sealing material for older cameras is no longer available, but didn't elaborate on substitute materials or methods. If anyone has information, how to, or advice, please and thank you! Also, are there special lubricants for the Bolex? If so, what type? Are they easily available? And what substitutes an be used? Well, thank you folks, I intend to get this camera running, and I have discovered that taking it apart was a challenge but was easier than I thought; and putting back together isn't that hard. The challenge is the adjust, sync and alignment. I sincerely thank each and everyone one of you who respond with anything, including stories and anecdotes about using these great cameras Cheers Gil in Washington DC USA
- 1 reply
-
- parts
- maintenance
-
(and 2 more)
Tagged with:
-
Hi! does anyone happen to have a maintenance manual and other documentation about Zeiss Oberkochen Opton 10-100 f1.8 (T2) (Arri-B // 16mm)? I converted my lens to s16 (12-120 T2.4) with Abakus (old optex) conversion kit. No vignetting with digital 2k. I've tried to search several times with different index words and and I even asked from Zeiss service. My lens has stiff focus and the focus helicoid needs a proper cleaning. Photos: https://drive.google.com/open?id=1adwPNUXdbbn6m8QPhRRvWs1fP8NU1Riq Thanks! Best regards, Atte
-
First time poster here. I just purchased a Dana Dolly rental kit (dana dolly, travel case, two lowboy combos, 5' of EMT track, and a Benro fluid tripod head). It's my first big purchase and I'm renting it out for the first time for an indie short film. It cost me $1,900 total and my plan is to rent it out enough to make money off of it, and eventually have it be passive income. If anyone has any tips for renting it out as far as websites to list it on, or any other ideas to expand my market, I'd greatly appreciate it. I plan on renting it for $100 a day. I live in the DC area, so if you feel like sharing what rental prices would look like in your area that would be great as well. My main concern is keeping it in the best condition that I can so that I'll be able to rent it out over the course of a few years, if it's not made obsolete by something else. What would you recommend for keeping all of my gear in good condition?
- 3 replies
-
- dana dolly
- dolly
-
(and 3 more)
Tagged with:
-
Hello all, This is a stupidly specific question, but I'm hoping some of the rental guys can chime in (help me, Guy Holt, you're my only hope). It recently came to my attention that all of my fixture heads are scratched to poop and I would love to do some touch up on them. Does anyone know where I could source some Mole Richardson high temp red and some Arri high temp silver/blue? I know a lot of local houses here in DC will matte black their fixtures partly for the sake of keeping them look tidy but I would love to avoid this. I know this would involve dismantling the fixtures for painting and painters taping over necessary warnings but work has been slow and I need something to keep busy. Thanks!