Search the Community
Showing results for tags 'color meter minolta'.
Found 2 results
The Minolta Color Meter IIIF is a top-of-the-line professional color compensation meter for ambient and flash with correction value memory. This makes it easier for photographers to maintain consistent color under various types of illumination. Priced at: $575.00 Brand New Condition The meter measures the color of the light illuminating the subject and determines the filtration required to correct that illumination for the film in use. When measuring both ambient light and flash, selecting the Color Meter IIIF's analyze function will subtract the ambient light and display only the measured results for flash light. Top-of-the-line, reliable, professional color meter Measures ambient light and flash Provides filtration readings for two types of filters: LB (Light Balancing) and CC (Color Correction) Analyze function determines measurement values for only flash light in mixed flash/ambient situations Measurements Can Be Taken for Any of the Three Major Film Types Daylight (balanced to 5500k) Type-A Tungsten (balanced to 3400k) Type-B Tungsten (balanced to 3200k) Measurement Results Can Be Displayed Several Ways As light balancing and color compensating indexes As Kodak Wratten filter number and CC index As photographic color temperature (determined color temperature based on film sensitivity) Kodak Wratten Filter Readings Display of Kodak Wratten filter numbers makes selecting filters quick and convenient If two Wratten filters are necessary, the Color Meter IIIF displays both numbers. Color Meter IIIF users can store their own personal correction values for the recommended filtration Correction values for LB and CC indexes can be stored in any of the meter's nine memory channels to custom tune meter readings for the desired color reproduction The correction values are added to the initial measured values to calculate the final displayed results Please text if interested: 760-505-7011
I'm new to handling color meters, and I picked up the Minolta Color Meter II after doing some research. It was also recommended to get it calibrated since that item can only be found used. I sent it off to QLM and it was done two days later. My question is, under CC, sometimes it'll still show 1 or 2, sometimes in the green or magenta, depending on where I am. I wanted to know if this is normal to sometimes see outside, and that it's properly calibrated.