J Van Auken Posted November 24, 2010 Share Posted November 24, 2010 Howdy, all I've recently acquired an early model XTR (pre plus) and the LCD footage counter is set to meters (camera came from Greece). The manuals and handbook don't mention switching it from metric to 'Merican, so I'm wondering if there's a series if buttons I push? I'm hoping I don't have to switch a board, or report it to INS. Link to comment Share on other sites More sharing options...
K Borowski Posted November 24, 2010 Share Posted November 24, 2010 Nah, you will be OK using meters in the US. It's when you use Imperial elsewhere that you get in trouble :blink: Sorry, I don't have anything serious to contribute to solving the problem. Just learn to count in .3048s if you can't fix it. Link to comment Share on other sites More sharing options...
J Van Auken Posted November 25, 2010 Author Share Posted November 25, 2010 I'm mostly just sick of having a heart attack every time I check footage after the first take and think I burned 280' somehow. Link to comment Share on other sites More sharing options...
J Van Auken Posted December 29, 2010 Author Share Posted December 29, 2010 for those who are curious, I had the XTR serviced by Bernie O'Doherty and was told that the metric/imperial switch is in the camera's wiring and cannot be changed. As an aside, I've decided not to sell the XTR just so I can break it, just so I can have Bernie service it again. Fantastic work. Link to comment Share on other sites More sharing options...
Rob Webster Posted June 28, 2011 Share Posted June 28, 2011 I know it's well past the point where anyone probably cares about this but for sake of sharing knowledge, I found out today (completely by accident), that you can toggle feet/metres in the following way. This isn't in the manual for older XTR's, but is in the manual for newer ones, even if the body is pretty much identical....either way: 1. Power down camera and remove from power supply. 2. Power camera up whilst holding "MAG" button. 3. Still holding "mag" button, push the "run" switch into test mode. 4. Flashing "feet/metres" will come up and you can use "mag" button to choose. DISCLAIMER: This works for newer XTR's, not sure how backwards-compatible this method is. Maybe give it a try someone? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now