Chad Delude Posted July 18, 2007 Share Posted July 18, 2007 Ok, I am looking for some imput on what "you" would like to see in mobile lighting. A little time ago, I was putting together a project and needed some mobile lighting. A well-known company in the biz is who I turned to, I will leave them nameless but people should know the 5-lettered business name. I found them a bit pricey for a 9, 6k lighting truck, but that wasn't my only issue. It was very difficult working with them and I was not happy with the experience in general. Now that my project is finished I am starting another venture and I am looking into constructing mobile light company. I think I can design something cheaper to rent, able to have your own crew operate and have the same flexiblilty as something twice its size. My question to you is what is important to you. I think the combination of 9, 6k lights is most effective in most aplications, but I want to hear all your thoughts. I may also be looking to hire a technical adviser for my project. Please send all question and comments my way. Thank you for your time. Link to comment Share on other sites More sharing options...
Gaffer Posted July 19, 2007 Share Posted July 19, 2007 I would always encourage anyone with a sense of adventure. 1st what knowledge have you too put a unit together. 2nd do your crew have an electrical knowledge + the required qualifications. 3rd a safe working knowledge of ventilation the ability to work out the loadings too work safely in or on locations with generators within premises. (industrial, schools, hospitals,etc). These may seem basic questions but overload a circuit in a hospital. Whats the worst that could happen. Knock out a circuit that trips a breaker, that controls a incubator, a life support machine, or just turns a light out while staff operating. Yes the premises have backup gennies that cut in when the power fails.(but not everywhere) Try and stick too what you can do. It takes years to become a good electrician thats before you enter the film industry. This may seem a harsh reply. If you find a gaffer check the people he has worked with, its only a phone call do not rely on companies that supply equipment, this is sometimes a bad way to go. Having worked in the industry quite a while. I have seen people that have put there name on a CV when they totally F*^%ed the job up. Always get more than one recommendation if you are not sure. Always discuss aspects of the job what Extras that are not included in the price of your project intended finish time. Once you have built you unit if you do? You now have to maintain it.keep it too a standard. if anything goes wrong its yours no insurance claim for loss of a shooting day. Good luck if you do. Advice is stick too people that do it for a living. When you find a good Gaffer he will look after its his living. Link to comment Share on other sites More sharing options...
Premium Member Kevin Zanit Posted July 21, 2007 Premium Member Share Posted July 21, 2007 Gaffer - You need to go to "My Controls" and set your display name to your real name per the forum rules. If you don't, your accountant will be removed. Thanks. Link to comment Share on other sites More sharing options...
Guest marciano Posted August 7, 2008 Share Posted August 7, 2008 I am a licensed electrician looking for employment in the mobile film sector. I am a hard worker and have always had passion for film. I had studied part time at York for Film and am a Bolex EBM user. If i can help for anything please contact me at: 4167450460 tooadvancedelectric@rogers.com I am Marciano :rolleyes: Thank you. Link to comment Share on other sites More sharing options...
Premium Member Andrew Koch Posted August 7, 2008 Premium Member Share Posted August 7, 2008 Marciano, please go to "My Controls" and change your username to your first AND last name. This is a requirement of the forum and Kevin just pointed this out to another poster on this thread. 2nd, I also work as an electrician and I know that it can be tough finding work and it is important to get your name out there. However, this thread is about someone designing their own lighting truck, not about hiring. It is important to stick with the topics, otherwise the forum will become too hard to find information (for example, you wouldn't want to see camera loading questions in the gripping section, etc...) Your post would probably be more appropriate in the JOBS, RESUMES, and REELS section of this forum. Link to comment Share on other sites More sharing options...
David Rakoczy Posted August 7, 2008 Share Posted August 7, 2008 Chad, Include your 'Location' in your signature. This will help you tremendously in any posting. Are you talking about 'Lights' or a 'Truck'?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now