jon lawrence Posted January 26, 2008 Share Posted January 26, 2008 For some reason my canon 1014xls has started playing up. Whenever I pull the trigger it runs for about a second and then stops and displays TAPE END in the viewfinder. This happens with or without a roll of film inside. I ran the camera with the door open and the crank only turns about 180 degrees each time. I tried shooting single frames and the same thing happens after about 15 frames. The footage counter seems to be reading fine. I've changed the batteries but still nothing. Any ideas/suggestions? Thanks -Jon Link to comment Share on other sites More sharing options...
Premium Member andy oliver Posted January 27, 2008 Premium Member Share Posted January 27, 2008 i know you've changed the batts, are they good, have you done a batt test on the camera? All your dials at 3 o-clock on the camera? Apart from batts, i really cant think of anything else, unless something is jamming, causing the cam to shut down, is the gate really clean?? Link to comment Share on other sites More sharing options...
Richard Baines Posted January 28, 2008 Share Posted January 28, 2008 That's what my 814XL-S does if you press the little sound cartridge sensor inside the camera when you don't actually have a sound cart in there. Maybe something is pushing this down when it shouldn't be? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now