Guest Steadicam Forum Posted April 16, 2009 Share Posted April 16, 2009 I had this cage made. It consists of the following: - 2 bottom parts (one for attaching dovetail to cage and for attaching camera to cage) - 3 top plates (weighing in at 1.890kg/4.1lbs each) - 6 different attachment holes for camera The cage when fully assembled weighs 10kg/22lbs. You will need at least one top plate, so at its lowest it can weigh 6.22kg/13.71lbs. Its third weight can be 8.11kg/17.87lbs. It will fit most cameras in the 1/3" and 1/2" range. Tried it with a XDCAM-EX1 yesterday. The technician that made it will make more upon request. I paid €500. LE If interested in buying one: please contact Michael Hofmann at Hofmann Teknikk in Sweden, mail: m(at)hofmann.se The machinist who makes them is called Per and works for Hofmann. His mail is per(at)hofmann.se View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts