Mike Thorn Posted April 24, 2009 Share Posted April 24, 2009 I'm 1sting my third RED feature starting next week. Pretty straightforward drama script. Probably the most complicated thing we'll do is some steadicam on set and some matchmove in post. I found out last night that the budget stretched like a pizza crust and the hole ended up in the camera department. So, we'll be using Nikon primes with the RED Nikon mount. I pushed for a set of Zeiss Ultras or Supers but apparently it was just too expensive. Fortunately we got an Arri mattebox and FF - we almost ended up with the RedRock clip-on, which would have been too time-consuming for this shoot. Any advice or pitfalls to watch out for? I personally own and love my Nikon D70, so I'm familiar with Nikon's zoom glass, but I'm a little dubious of what it's going to look like on RED (don't tell the producer!). Anybody know of any examples of RED footage shot with Nikon primes? Link to comment Share on other sites More sharing options...
Jamie Metzger Posted April 25, 2009 Share Posted April 25, 2009 Ugh. Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 25, 2009 Premium Member Share Posted April 25, 2009 How the hell do they expect you to pull focus on steadicam with Nikon lenses that don't have gears or witness marks?! I would inform them right away that this will not be possible before they get any further into pre-pro. Does production even realize that they need to rent a wireless follow focus and wireless video assist to do steadicam? You could potentially argue for super speeds or zeiss standards just for the steadicam days. Beyond that, all I will say is that Nikkors+Red can look very sharp and lovely, WHEN IT'S IN FOCUS. Without reliable witness marks on the lens, you have to focus by eye (monitor). That ain't gonna happen on steadicam shots... Link to comment Share on other sites More sharing options...
Mike Thorn Posted April 25, 2009 Author Share Posted April 25, 2009 Oh, I already asked for a wireless, but they decided that there wouldn't be enough movement in the steadicam to make it worth the thousand bucks. :) Guess we'll see. The first four days are super-light, so that will be the time to shake down the rig and order a remote if they change their minds. But that's not the best part... I suggested several competent steadicam ops I know, both local and out of state, but they decided that there wan't enough money for that either (did I mention the budget got cut?), so I'll be doing that too. I'm not an op, but I've assisted steadicam several times, so I'm the best they're going to get for the money. Ha. Good thing I love a challenge. Too bad I cut my rate for this job! :D Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 25, 2009 Premium Member Share Posted April 25, 2009 Good thing I love a challenge. Too bad I cut my rate for this job! :D Jeez, these guys are ridiculous. You already know who they're going to be pointing their finger at when it all hits the fan, don't you? Good luck, that's all I can say... Link to comment Share on other sites More sharing options...
Mike Thorn Posted April 26, 2009 Author Share Posted April 26, 2009 Well, I have records of my advice to the producer and DP, if that happens, so I'm not real worried about that. My biggest concern is not being able to deliver the goods. I hate doing half-baked work and calling it good just for the sake of a few dollars. Either spend the money and do it right or don't do it at all. Go big or stay home, so they say. Link to comment Share on other sites More sharing options...
Dan Diaconu M Posted April 26, 2009 Share Posted April 26, 2009 Go big or stay home, so they say. So.... you start a thread only to let us know you're staying home? :blink: Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 26, 2009 Premium Member Share Posted April 26, 2009 So.... you start a thread only to let us know you're staying home? :blink: No, he's going for it. Link to comment Share on other sites More sharing options...
Chris Pickle Posted April 27, 2009 Share Posted April 27, 2009 I'm 1sting my third RED feature starting next week. Pretty straightforward drama script. Probably the most complicated thing we'll do is some steadicam on set and some matchmove in post. I found out last night that the budget stretched like a pizza crust and the hole ended up in the camera department. So, we'll be using Nikon primes with the RED Nikon mount. I pushed for a set of Zeiss Ultras or Supers but apparently it was just too expensive. Fortunately we got an Arri mattebox and FF - we almost ended up with the RedRock clip-on, which would have been too time-consuming for this shoot. Any advice or pitfalls to watch out for? I personally own and love my Nikon D70, so I'm familiar with Nikon's zoom glass, but I'm a little dubious of what it's going to look like on RED (don't tell the producer!). Anybody know of any examples of RED footage shot with Nikon primes? Recently shot 2 features with Red / Nikon. Mostly 35 / 50 / 85 ... some 135 & 17-35. Footage looked great, especially 35, 50, 85. Focus was tricky but we managed. Dp / Operator pulled his own focus from LCD, but he's a machine and shoots this way 5 days a week. I must say how surprised I was in how well it worked. When I hear eveyone worried about this approach, I'm not sure what they mean. Yeah, it was tough, but the Nikons were faster then a set of ZFs or Standards. Obviously the biggest issue is the short focus turn radius... but For anything low budget, I'd just go this route. The LCD was remarkably accurate. Chris Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 28, 2009 Premium Member Share Posted April 28, 2009 (edited) When I hear eveyone worried about this approach, I'm not sure what they mean. Yeah, it was tough, but the Nikons were faster then a set of ZFs or Standards. The original post was from a 1st AC's perspective, not from the DP's, and we were talking specifically about pulling focus on steadicam shots. Our job is to make sure the image is sharp. That's what we get paid for. If the image is soft, we lose our jobs. If you are a DP pulling your own focus, and your producers will accept some blown takes due to soft shots then that's fine. That has nothing to do with us. Look, I've done plenty of jobs pulling from the barrel with Nikkors. But it's worse than stupid to combine that with steadicam. Doesn't make any sense. As far as Nikkor lenses being faster, I don't see what that has to do with what we're discussing. Obviously the biggest issue is the short focus turn radius... That's not correct. The biggest issue is not the short throw of the lens barrels, it is the lack of calibrated witness marks and collimation of the lens which ensures the accuracy of those marks, as well as the lack of focus gears. You can only focus "the old fashioned way" when working with steadicam, by judging distance from the focal plane to the subject and using a wireless follow focus device. Nikkor lenses only work when you focus from a monitor. If you have your Nikkors fitted with 0.8 pitch gears, it may be possible to do this sitting at the big monitor if you have an HD wireless video system like the WEVI but you won't have that luxury on a no-budget shoot. Edited April 28, 2009 by Satsuki Murashige Link to comment Share on other sites More sharing options...
Chris Pickle Posted April 28, 2009 Share Posted April 28, 2009 The original post was from a 1st AC's perspective, not from the DP's, and we were talking specifically about pulling focus on steadicam shots. Our job is to make sure the image is sharp. That's what we get paid for. If the image is soft, we lose our jobs. If you are a DP pulling your own focus, and your producers will accept some blown takes due to soft shots then that's fine. That has nothing to do with us. Look, I've done plenty of jobs pulling from the barrel with Nikkors. But it's worse than stupid to combine that with steadicam. Doesn't make any sense. As far as Nikkor lenses being faster, I don't see what that has to do with what we're discussing. That's not correct. The biggest issue is not the short throw of the lens barrels, it is the lack of calibrated witness marks and collimation of the lens which ensures the accuracy of those marks, as well as the lack of focus gears. You can only focus "the old fashioned way" when working with steadicam, by judging distance from the focal plane to the subject and using a wireless follow focus device. Nikkor lenses only work when you focus from a monitor. If you have your Nikkors fitted with 0.8 pitch gears, it may be possible to do this sitting at the big monitor if you have an HD wireless video system like the WEVI but you won't have that luxury on a no-budget shoot. I wasn't talking to you. If you read my post, you'd see I was responding to the OP's first post. (which I quoted!) I was simply giving my two cents on shooting Red & Nikon, which is what the OP was asking for. All my comments were to my experiences--like, lens speed, focus, my thoughts on pros & cons... etc. My comment about folks complaining about this setup wasn't directed at you, nor anyone in particular... I hear the Nikon lens lament often enough to comment on it without talking about you. These were MY EXPERIENCES. Do you think everyone who posts in this thread must make posts that are relevant to yours? Or are we allowed to comment / respond to the OP? Link to comment Share on other sites More sharing options...
Mike Thorn Posted April 28, 2009 Author Share Posted April 28, 2009 Whoa, guys...chill. It's cool. I appreciate the input from both of you. Anecdotal advice is just as relevant, to me, as factual evidence. There's plenty of work to go around. We don't need to bicker over it like kings of little provinces, scared to death that one little slip will cost us our careers. I'm on location now, posting from my smartphone. I'm supposed to get the camera package within an hour. Here goes nothing! :) By the way, the steadicam unit is the straight-from-india Magic Arm 6000. It's a beef little rig, supposedly capable to 50+ lbs. We'll see. Has an unusual mounting plate, it seems, but they greatly improved the balance fine-tuning mechanism. No more allen keys! Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 29, 2009 Premium Member Share Posted April 29, 2009 (edited) I wasn't talking to you. If you read my post... Clearly, I did read your post since I was responding to the points you made in it. I didn't realize you were not "talking to me," so if I offended you by responding to your statements, then I apologize. It was not my intent to offend you. I see now how my response could be seen as being dismissive of your experience. That's not what I was going for, so again, I apologize. If you're interested, I was responding in particular to this statement you made: When I hear everyone worried about this approach, I'm not sure what they mean. I assumed you would want to know the answer, so I gave it. Hopefully, that was helpful to someone reading this thread, if not to you. Do you think everyone who posts in this thread must make posts that are relevant to yours? "Must?" No, of course not. I do think that's the whole point of a discussion though, isn't it? To agree with/contradict/amplify/clarify someone else's statement in order to expand everyone's knowledge of the topic at hand? That was my sole intent in responding to your post. You are also welcome to respond to my comments for the same purpose, if you so choose. Or are we allowed to comment / respond to the OP? Of course. Am I allowed to respond to the ideas expressed in your comments for the sake of discussion? *Sorry to derail your thread, Mike. It won't happen again (at least by me). Edited April 29, 2009 by Satsuki Murashige Link to comment Share on other sites More sharing options...
Andy_Alderslade Posted April 29, 2009 Share Posted April 29, 2009 (edited) By the way, the steadicam unit is the straight-from-india Magic Arm 6000. It's a beef little rig, supposedly capable to 50+ lbs. We'll see. Has an unusual mounting plate, it seems, but they greatly improved the balance fine-tuning mechanism. No more allen keys! Blimey! They really are cutting it thin - why don't they just rent a Steadicam Flyer, you can use them with a stripped down Red, and they're not an expensive rig to buy or rent... Do they have an operator? Edited April 29, 2009 by Andy_Alderslade Link to comment Share on other sites More sharing options...
Chris Pickle Posted April 29, 2009 Share Posted April 29, 2009 .......... Am I allowed to respond to the ideas expressed in your comments for the sake of discussion? ........ You not only responded to my comments, you essentially told me they were not relevant to discussion. At least, I suppose, not your part of it. I don't dig harsh, and sometimes these boards, in my view, can be a bit knee-jerk. ........ If you are a DP pulling your own focus, and your producers will accept some blown takes due to soft shots then that's fine. That has nothing to do with us. ...... But it's worse than stupid to combine that with steadicam. Doesn't make any sense. ........ I don't see what that has to do with what we're discussing. That's not correct. ........... Sorry if I came to the discussion late... and it had evolved beyond general feedback on Red & Nikon to Red & steadicam & nikon & pulling focus. I did however have a small amount of insight into the general idea of Red & Nikon and I apologize if my comment on taking issue with other folks issues with Nikon seemed harsh to you. Yes, my experience doesn't include Stedicam, so I can't speak to that. The two features we just completed with Nikons. We were lower budget, but the footage looks fantastic. On a tight budget, I wouldn't break the bank with expensive rentals if I had access to fast Nikons. When I hear of folks going to the ZF line, I'm surprised, since there is no image benefit and I can't imagine that a smoother focus barrel (that is still short) would factor. And as I mentioned, going to Standard Speeds, well, on low budget, I would have missed all those stops. On the other hand, it would be great to have a fast set of quality PL glass. Hopefully Red has solved the issue for the budget minded. It's all good. Chris Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 29, 2009 Premium Member Share Posted April 29, 2009 I think Mike mentioned earlier that production asked him to operate because there was no budget for a steadicam op. Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted April 29, 2009 Premium Member Share Posted April 29, 2009 It's all good. Ok, glad we're cool. Link to comment Share on other sites More sharing options...
Morgan Lowndes Posted April 29, 2009 Share Posted April 29, 2009 hi chaps if the steadicam shots look poop and some of the tripod/handheld shots are soft, then surely the blame should land squarely on the shoulders of the DoP, being the Head of the camera dept...? cheers morgs Link to comment Share on other sites More sharing options...
Mike Thorn Posted May 1, 2009 Author Share Posted May 1, 2009 Day 2 down. So far so good. No steadicam in sight. Love the look, hate the short throw. Shooting interiors at 2.8 too. Fun. -Mike Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted May 1, 2009 Premium Member Share Posted May 1, 2009 Day 2 down. So far so good. No steadicam in sight. Love the look, hate the short throw. Shooting interiors at 2.8 too. Fun. -Mike Good to hear Mike. Is there a data manager on set who is checking focus for you in Redcine as well as looking for clip errors? Link to comment Share on other sites More sharing options...
Mike Thorn Posted May 2, 2009 Author Share Posted May 2, 2009 Good to hear Mike. Is there a data manager on set who is checking focus for you in Redcine as well as looking for clip errors? If we had the money for a real camera dept, we wouldn't be using Nikkors... ;) It's just me and the DP. Today I was fortunate and the AD sent 2 PA's my way to take some duties off my mind. We don't even have on-set data offload hardware. We shoot onto 2 RED RAIDs and they get dumped every night. We swap out at lunch. Link to comment Share on other sites More sharing options...
Premium Member Peter Moretti Posted May 4, 2009 Premium Member Share Posted May 4, 2009 ...When I hear of folks going to the ZF line, I'm surprised, since there is no image benefit and I can't imagine that a smoother focus barrel (that is still short) would factor... FWIU, the ZF's have these following advantages over Nikon lens: longer focus travel, hard stops (some Nikkors go round and round), color matched glass across the entire line, usually nicer bokeh, tack-like sharpness. Of course Nikon lenses are sharp and have nice bokeh, but the Zeiss's seem to surpass even Nikon's level. Link to comment Share on other sites More sharing options...
Mike Thorn Posted May 7, 2009 Author Share Posted May 7, 2009 One week down. So far so good. We've been shooting wide open (usually 2 to 2.8) and results have been nice. We're heavily favoring the 17-35mm, 28mm, and 50mm. We'll spend a lot of time on the 35mm when it arrives. I could really use a remote FF right now - pulling off the Panasonic 17" monitor would be much easier than pulling from the RED LCD, as much as I do like it. By this time next year I'd like to own my own Viewfactor or Bartech. I offered to hire my own 2nd if they would put him up, so Colton Davie will be arriving Monday to keep me sane and help spread the work around. The producer has a meeting with investors today, and if we get a budget bump we'll probably be getting some sort of on-set data offload equipment. For the moment, the producer's sister is helping me out and is doing very, very well. If she was around all week (she has a full-time job) I probably wouldn't need Colton, but we're moving into deep territory this week. Had a RED brick die on me this week. It shows a full charge, juices up just fine on the RED charger, but won't power on the camera. Oddest thing. Anybody know what might be the problem? Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted May 7, 2009 Premium Member Share Posted May 7, 2009 Had a RED brick die on me this week. It shows a full charge, juices up just fine on the RED charger, but won't power on the camera. Oddest thing. Anybody know what might be the problem? Could be the battery contacts. There were several threads either here or at Reduser.net a while back about this. A lot of people were having issues early on with the Red batteries not powering the camera, so one guy opened one up and noticed that the plastic cradle for the metal contacts on the inside had bent. So although everything looked fine from the outside, the inside contacts had lost connection with the outside contacts. I think what he did to solve this was to bend the plastic back into place and then shave off some plastic around the outside battery contacts for a better connection. Could be worth looking into - I had some trouble a few weeks back with some privately owned batteries that wouldn't charge which I suspect may have the same problem, so there are still batteries out there that haven't been fixed. Link to comment Share on other sites More sharing options...
Premium Member John Sprung Posted May 8, 2009 Premium Member Share Posted May 8, 2009 I haven't seen the specific guts of a Red battery, but what happens generically with batteries sometimes is a bad cell. You can charge up a battery with a bad cell, and it'll test OK with an ordinary voltmeter. But when you put a load on it, the bad cell stops acting like a battery and starts acting like a resistor, so the voltage takes a big dump very quickly. If that test reveals a bad cell, you have to open the battery up and replace it. If the battery is fairly new and the other cells look OK, replace just the one. If the whole thing is getting old, start fresh and replace them all. Oh, and you also need to take the old cells back where you got the new ones for recycling. -- J.S. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now