DIY Tank Processing (16mm)

[Paul Bruening]

I would just caution that if you get the film wet and remove the remjet you would have to wind it into a spiral reel such that the film would not be wound together causing the emulsion to adhere to the base layer to layer. The nice thing about a processor is that once it goes into the soup the film is not tight wound together till it leaves the dry box.

 

Good Luck

 

-Rob-

 

My thinking right now is to wind it emulsion side out onto a 24" wide piece of PVC pipe after running it through two small plastic tanks with the appropriate chemicals and works to knock off the remjet. I'll have to come up with a way to pay it out evenly across the length of pipe in corkscrew fashion. I'm still working on that one. I was just glad to find a decent way to manage the remjet thing at this moment.