Guest Steadicam Forum Posted September 28, 2009 Share Posted September 28, 2009 For Sale: PRO 1 Donkey Box II Junction Box Center Post Gimbal Wrapgrip II Oversize (Black) (2 1/4 x 5") Wrapgrip II Oversize (Red) (2 1/4 x 3.5") Monitor Arm (Short) Monitor Arm (Long) Monitor Arm (Regular) Transvideo Cinemonitor I Transvideo Rainbow LCD Monitor Transvideo Frameline Generator Level Sensor I PRO 1 Battery cage with quick connector PRO 1 Battery cage (back up) Recorder Bracket Rain gear for battery cage Dockclamps (2) Pelican Case 1650 20 PRO batteries 3 PAG chargers 10 charging cables Anvil shipping cases Docking Bracket II Camera Truck wall mount Transvideo Knee Joint with Clamp ARRI-3 Lowmode bracket J-Bracket Compact/Pana Camera Plate 9" (2) Compact/Pana Camera Plate 7" (1) Arri/Pana Camera Plate 9" (1) Camera Screws (4) Hardmount Balancing beam (with Junior spud) Transvideo Pana Power (24Volt) (4) Transvideo to 4 pin XLR Power (12 Volt) Transvideo to 3 pin XLR Power (24 Volt) 6 feet LCD to Frameline power/data (2) Transvideo to PRO monitor plug Y-Cable (4) Transvideo to PRO monitor plug Y-Cable (long) Transvideo to PRO video plug Y-Cable (5) PRO Camera Power cables for most cameras Sony 8" Fieldmonitor Monitor tray Sony 1041 receiver Single channel transmitter (5) Sony GVU-5 Onboard recorder Lightweight Lightbox for steadicam UHF Preston FIZ Handunit UHF Motor Driver (MDR) MDR to PRO mounting bracket UHF Radio Transmitter (2) 2 chargers Transmitter batteries (many) DM-1 Motor (2) Gears Mounting brackets Panavision Steadicam Bracket Antennas Many, many spares And tons and tons of little one offs, custom parts, etc. Rig received full service by GPI. Cleaned and Lubed, broken parts replaced etc. Batteries, 11 are recelled, 7 are good, 2 unknown (Button doesn't work, replacements are included) Both Monitors and frameliner received full service from Transvideo. Notch Filter new on both units. This is one of Bob Ullands old rigs. Thank you to George Paddock and his team, Marianne from Transvideo and her team as well as Tiffen and Preston Cinema for the great service and effort to get this rigs ready to be passed on to the next generation of operators. The greatest care has been taken to insure that all parts are in perfect working order. NO ARM, NO VEST included, check the other listings. Price: $37'000.- For Pictures, Please Check: http://www.steadicam-ops.com/database/soaC...p?recordID=4117 View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts