Guest Steadicam Forum Posted October 15, 2009 Share Posted October 15, 2009 Sadly I’m selling my Archer sled with custom built battery mount. The rig was bought in November of 2005. Delivered in February from Tiffen in 2006. Only one owner. Never rented out. A great video and light film rig. This is a 12v/24v rig. Batteries are V-lock style. The monitor is the original 7" TFT 700nit monitor with framelines. I’ve had many cameras on this rig. Ranging from RED, SR2, SR3, 416, Aaton 16mm, Sony F-900 w/ Pro35, Panasonic AJ-HPX3700/3000 w/ Pro35, 2/3” video, 1/3” video. 3 different weights are included. These are attached under the battery mount, there is a dovetail there. Weights are there to give you a wider range of desired sled length. But you in most cases, if you don’t want to use them, there is no need. The bottom dovetail can also be used to attach Antlers. Items: Archer rig Docking bracket Allen wrench Extra gimbal screws 7" monitor Low-mode kit Sony video camera bracket Archer dovetail x2 Arm posts x2 - one normal, one long. Long one is 30cm/11.81inches (These are arm posts that Tiffen specially made so you can have a Master/Ultra/G-70 arm if desired.) Cables: Archer 3-pin Lemo to 12v video power cable x2 Archer 3-pin Lemo to 4-pin hirose 12v x1 Archer 3-pin Lemo to RED 12v power cable x1 Archer 3-pin Lemo to 24v power cable x1 Archer 3-pin Lemo to 24v ARRI 435/ST/LT x1 Thin BNC cable x1 NO ARM, NO VEST Selling due to upgrading to U2. Asking €9000 Buyer pays for shipping. Contact me either by phone +4797194150 or mail, post@steadi.no LE View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts