Guest Steadicam Forum Posted April 15, 2010 Share Posted April 15, 2010 Pakcage 1: $22,500.00 Sled is all new material except the gimbal which I have overhauled. sled 12/24 volt, HD ready- I really need to explain the wiring over the phone, All HD Wiring-3 lines top to bottom and another NTSC video in for a video distribution amp. 3A gimbal and wrap grip new LUNA arm 3A vest customized with master series pads, buckles and straps. sled case with refoamed custom cut foam, anvil style case used vest& arm case, anvil style case used c-stand and sand bag docking bracket and dovetail plate with mounting screws Steadicam workshop manual, EFP manual, Master Series Manual schematics of all connectors and pin outs on sled schematics of all popular cables except RED Red byte down converter with power cable and two 6" BNC One 3' BNC cable 7"NTSC/PAL LCD with power/video cable 2 t-handle Allen wrenches for arm universal screwdriver *no camera power cables *IDX mounts are on there now and include 4 used E10 batteries and dual charger. *I can have an Anton Bauer version mounted the same way but it would take about 1 week, it would include a used dual anton charger, 2 used ProPac 14 65wh batteries, and 2 used Digital Propac 14 65 wh batteries. Kyle young 818-795-4433 steadiapolis@hotmail.com Palmdale, CA 93551 (Los Angeles) View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts