Guest Steadicam Forum Posted June 1, 2010 Share Posted June 1, 2010 All this gear MUST GO, if you're in town for Cinegear/Tiffen Open House/Steadicam Expo and looking for gear you need to see these. None of this gear is mine, I'm just helping out in the sales. All gear is Located in Los Angeles. Will ship worldwide via Fedex. Buyer is responsible for shipping, insurance and any import duty and taxes. Complete XCS Ultimate Package: Original Ultimate sled fully serviced last week. Upgraded to latest specs. Build in Programable Digital Level, UNO transmittable single frame line generator. Smart battery supply upgraded to handle Genesis and F-35 Cameras. Will run 12 and 24 Volt cameras from one Battery, up to 3 batteries can be used. Modified for live and TV shows. Upgraded to HD. It's an "getting out of business sale" (No not me), so there are 2 buckets (and I mean buckets) of goodies includedÂ… selling EVERYTHING! Ultimate Sled: Upper Camera Platform 2' Carbon fiber Telescoping Post Ultimate Gimbal Monitor Arm (old style) TB-6 Smart Monitor with Duo Frame liner Monitor mounted BAttery Voltage read out Ultimate Lower Electronics Housing Build in PDL Build in UNO XCS Camera Dovetail Plate Master Series Camera plate Pelican 1650 Shipping Case for Sled (like new) Master Arm F-Bracket for Master/Ultra Angled F-Bracket for Master Arm to 3A/PRO/Ultimate Master style 18 inch Arm post Master style 8 inch Arm post Master to 3A/PRO/Ultimate Arm Post (Short) Master Arm Post (Short) Arm Soft bag Master Vest (Modified to exclude quick release) Pelican 1650 Shipping Case for Arm and Vest Docking Station II Lightweight Docking Stand Vehicle Hardmount 1 Anton Bauer Magnum Quad Charger 2 Propac 14 (good condition) 2 Proformer (good condition) 3 Compac (dead) 4 TB-6 to sled power cable 2 12 Vdc XLR camera power cable 2 12 Vdc XLR High Speed Base Power Cable 2 24 Vdc XLR camera power cable 2 24 Vdc Fischer camera power cable 2 24 Vdc Panavision LW camera power Assorted BNC and RCA cables, etc (poop loads) TT2 Genio FollowFocus 5 Focus Rings 2 FMG-6 Motor with full set of gears and spacers 2 Heden M 26P Servo motor 3 Chrosziel Idler Gears for Heden 2 Chrosziel Motor bracket for Heden M 26P 4 Genio to Heden Motor Cable 5 Genio to FMG-6 Motor Cable 2 Genio to PRO/Ultimate Power 2 Panavision Run Cable 2 Arri 12Volt Run Cable (11 pin Fischer) Pelican 1600 Shipping case for FF J-7 Gimbal Focus/Iris control with Fuji and Canon Cables Tally Light Timecode Transmitter Transmitter (High output, 2 channel 17 and 18) DX-400 Receiver with 14 inch TV Set (AC) 12 inch TV set with receiver (AC and Anton bauer Plate for DC) Sharkfin Antenna Yagi Antenna Standby Cover Tool and Repair Kit And tons of goodies Rig and Accessories are in Pristine condition. Fully overhauled and serviced by XCS. Not used for a couple of years do to health reasons. PRO II Sled Donkey Box II FF Bracket Junction Box Center Post PRO Gimbal Wrap grip II Oversize (2 1/4 x 5") (Gray) Monitor Arm PRO 2 CRT Green screen monitor Rain Cover For Monitor Level Sensor I Level Sensor II PRO 2 Battery cage with quick connector 3 Jumper Blocks Recorder Bracket Rain gear for battery cage Dock clamps (4) Anvil lightweight shipping case 7 Anton Bauer Dionic batteries 2702 Dual Charger 2702 Dual Charger (with Discharge Module) AC and DC Power cables Anvil lightweight shipping case Docking Bracket II Camera Truck wall mount Moviecam Compact/SL Lowmode Bracket ARRI-3 Low mode bracket J-Bracket Compact/Pana Camera Plate 9" (2) Compact/Pana Camera Plate 7" (1) Arri/Pana Camera Plate 9" (1) Camera Screws (4) Cleaning and lubing utensils Tools Full PRO Cable Package (Camera Power, Monitor Power, etc.) And tons and tons of little one offs, custom parts, etc. Anvil lightweight shipping case for AKS Rig received full service by GPI. Cleaned and Lubed, broken parts replaced etc. Batteries are all charged and checked. The greatest care has been taken to insure that all parts are in perfect working order. NO ARM, NO VEST included. Make a reasonable offer Master Series Lightweight vest. Master Vest (Modified to exclude quick release, Nylon not Leather) Pelican 1650 Shipping Case for Vest included. Also spare buckles, etc. Asking: $3100.- Master Arm Includes: F-Bracket for Master/Ultra Angled F-Bracket for Master Arm to 3A/PRO/Ultimate Master style 18 inch Arm post Master style 8 inch Arm post Master to 3A/PRO/Ultimate Arm Post (Short) Master Arm Post (Short) Arm Soft bag Pristine Condition Asking $10000 OBO BFD / Bartech Focus Device BFD Serial # 590 Includes: Transmitter (Handunit) Transmitter Antenna Receiver (Motor Driver) 3 Receiver Antenna (right angle) Receiver mount to PRO (single) Receiver mount to PRO (dual) Side mount bracket 5 Focus strips Spares 2 BFD to PRO Power short BFD to PRO Power long 4 pin XLR to BFD Power BFD to BFD power (daisy chain for 2nd BFD) Moviecam Run Sony F900 Run Panavision Run Aaton Run Arri 12V Run Original case M-1 Motor Attachment Aks 6 gears (0.8 wide, .08 narrow, 0.6, 0.5, 0.4, 48P) 2 Motor Cables Original case Asking: $4200.- Genio Follow Focus, comes with 2 hand controllers and 4 motors. TT2 Genio Follow Focus 5 Focus Rings 2 FMG-6 Motor with full set of gears and spacers 2 Heden M 26P Servo motor 3 Chrosziel Idler Gears for Heden 2 Chrosziel Motor bracket for Heden M 26P 4 Genio to Heden Motor Cable 5 Genio to FMG-6 Motor Cable 2 Genio to PRO/Ultimate Power 2 Panavision Run Cable 2 Arri 12Volt Run Cable (11 pin Fischer) Mounting Brackets, etc. Pelican 1600 Shipping case for FF PRO 2 solid style Post (does not extend) Quick release style post 18 inches in lengths Color Gray Includes cable (8 pin) (NO it's not the HD version) Asking: $500.- None of this gear is mine and some of you might recognize these rigs, I'm Helping Erwin sell these and they need to go. Contact me or Erwin Thanks! View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts