Guest Steadicam Forum Posted September 17, 2010 Share Posted September 17, 2010 I am replacing the topstage on my rig, and selling the one below. The J- box seen on some of the shots is not included; it’s permanently wired up and cannot be removed. The post screws to the top of the rig using the standard allen attachment screws. Adjustment for balance is right/left on the stage itself and fore/aft using the geartracks bolted to the underside of of the baseplates. Three baseplates are supplied, and they have enough holes in them to match most camera types and can take standard 1/4″ and 7/8″ camera screws. Trim adjustments are made by the black dials shown. A friction lock secures the baseplate when the rig is balanced- but there is also an emergency lock recessed into the side of the stage to prevent release if the plate slips. Bars at the front of the top stage allow J boxes and remote focus units to be mounted. £900.00 plus shipping. Any questions please email joe@joebullensteadiam.com or call + 44 (0) 7791 212263. Thanks for looking. <h4></h4> View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts