Guest Steadicam Forum Posted December 3, 2010 Share Posted December 3, 2010 PRO sled with bayonet mount PRO Center-post PRO Donkey Box I (low hours, has been on my super-post) PRO Upper Junction Box PRO Battery Module I CP 3A Gimbal with MK-W tool less clamping Custom thin side cable down the post PRO "T" MDR bracket 10 Ni-MH Batteries 13,2v 4.5 AH, weight 0,9 kg/1.9 lbs each Camera Essentials Rain-cover for battery cage Monitor bracket D-bracket Sled hard case manufactured in 2007, 3 extra storage compartments, compact & light Jerry hill dock (the fork) Jerry hill MAG dock 2 Black Jerry Hill locking-docking clamps 2 PAG multi format Battery Chargers 100-230 V~ (Li-On/Ni-Mh/Ni-Ch) 2 AC power cables Battery and charger hard case. Manufactured in 2007 very compact and light 6 PRO Battery charging cables 2 PRO-12v battery to 4-pin XLR power cables PRO gyro system, complete with cables and inverter, backpack, post clamp, (no gyros) Schematics for sled / manual Manuals for chargers Description: This sled is a PRO generation I. The rig was bought by me in 2000. It has been meticulously cared for with regular service and maintenance. It has only had two owners and has never been used as a rental rig. It is in great condition for a used system. That is a testament to the quality of the product that it is still in such a god condition. The center-post extends from 17” to 26”. There is a Custom extra cable down the center-post for tally or other function. The connector is on the left side of the monitor Lemo. The gimbal is a CP 3A that is in excellent condition and has been on the super-post all this time so naturally it has low use. It has been fitted with a MKW tool less lock. 10 PRO Ni-MH batteries. 13,2v 4.5Ah. All ten batteries are in good condition. 5 were re-celled in 2010 and the other 5 in 2007. They all work perfectly. In 2009 The 10 batteries were rebuilt changing the voltage-push button on the back. The new button has a better click "easy-puch " function and are better than the original. On one battery the voltage-display is dead. I normally use that for the monitor so thats no problem. The display is probably easy to replace. The Ni-MH batteries weigh (0,9-kg)less than standard Ni-Cd and also have a lot more Ah. Two 4-channel PAG battery chargers in excellent condition fairly low hours, bought in 2005 and 2006. They come with 6 battery charging cables and two AC power mains. The GYRO system just needs 2 gyros and is ready to go. Or maybe as a rebuild for a GoldMount-light-weigth system. photos of the sled $ 6000 O.B.O Will ship worldwide TB-6 and PDL Sold and not included. ------------------------------------------------- Johan Phillips Film & Steadicam Sweden M +46 70-733 06 91 Skype:johanph My email <h4></h4> View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts