Genio 2+ channel FF kit with Heden Motors - breaking for spares / parting out

[Guest Steadicam Forum]

HereÂ’s the deal:

My assistant (no names, to protect the guilty) dropped the transmitter and itÂ’s broken!

It was in single channel mode at the time, ie just the tx and battery. IÂ’m sure it could be repaired or you can use it for spares.

The second channel splitter handle and focus control are therefore fine, as is the receiver. ItÂ’d be ideal if you want to upgrade your single channel setup, or youÂ’re handy with fixing things.

 

Parts list:

Heden M26p motor, with 0.5(Canon), 0.6(Fuji) and 0.8 gears and Optex mounting bracket. 550GBP

 

Heden M32p motor, with 0.5(Canon), 0.6(Fuji) and 0.8 gears and Optex mounting bracket. 650GBP

 

Pantali tx splitter handle, with 2nd channel tx controller

3 channel receiver with 90deg aerial, inc power cable (HRS 4 pin to HRS 4 pin)

Tx module (broken) with straight aerial

2x tx batteries and chargers (one cable modified to plug into fast charger via BP90 type plug) 1,500GBP

 

Cables:

Heden motor cables (5 pin) @ 60 GBP each

3x straight motor cables

2x coiled motor cables

 

Camera run cables @ 50 GBP each

2x Arri (1 straight, 1 coiled)

1x Aaton (coiled)

1x PV

1x Millennium (coiled)

1x Arri III

1x Moviecam

 

Receiver power cables @ 45 GBP each

1x Canon 4pin (UK spec 12v) (coiled)

1x Moviecam

 

1x tx power cable to Canon 4 pin (UK spec 12v) 40GBP

 

4x focus scale rings @ 5 GBP each

 

All prices in GBP, + delivery costs from the UK.

 

Dion Casey tel: +44(0)1460 30005

email: dion@dioncaseyfilms.co.uk

Attached thumbnail(s)

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

 

View or reply to the original post at SteadicamForum.com