Guest Steadicam Forum Posted June 15, 2012 Share Posted June 15, 2012 FULL MASTER KIT INCLUDING ARM, SLED, KLASSEN VEST, TRANSVIDEO CINE 3A Amendment to original listing with the addition of a Klassen vest in excellent condition.Still selling my Master arm and sled including my Transvideo cine 3a LCD and includes the following: Steadicam Master Sled with 4" 16"9 CRT Green Screen Frame line Generator ( bottom frame line doesn't move to bottom of frame, but stays within safe area) Transvideo Cine3a Ultrabrite LCD, with bracket and cable. Master to BNC/Power cable, DA with video out and 12v power out Flight case Power cables BNC's Tool Kit Docking Bracket Dovetail plate Low mode clamp and small Dovetail plate Tally light sensor Flights Case with wheels 4 x Pag Batteries, Charger and flight case Master Arm In good working and cosmetic condition. It has one small cosmetic fault, shown in the third picture, where one of the spring shield screws has broken its connection. This does not affect the performance or security of the sheied or the arm at all. The arm also comes with: Soft bag F bracket Rain Covers Walter Klassen Vest Suit 32" Waist Height 5.10' -6.1" approx in excellent condition I will also throw in a custom weight cage for DSLR and other light weight cameras. £10500+VAT in the UK unless you are in Europe and are VAT registered. Attached thumbnail(s) View or reply to the original post at SteadicamForum.com Link to comment Share on other sites More sharing options...
Recommended Posts