Arriflex Standard to PL Mount Adapter - Stainless Steel

[John Jaquish]

This is a very nice, heavy duty Arriflex Standard to PL Mount Adapter made of high quality stainless steel with a rubber light gasket at the camera end. I purchased this from a DP who had this part designed and only used it a few times. I never used it, because it's too large for my Arriflex BL3 (it extends too far and would hit the mirror shutter -- note: this will not work with film cameras -- it's too large). Although, this was designed specifically for the Red ONE, and I can only imagine it would work with the Epic/Scarlet, Alexa, and other digital cameras, but I've not tested it with them.

 

http://www.ebay.com/itm/Arriflex-Standard-to-PL-Mount-Adapter-Stainless-Steel-Red-Arri-Alexa-/331063578499

[Aaron Michael Rich]

Have any ideas if it would work with an Aaton Xtera?

 

Or you're sure it won't work for all film cameras.

Edited November 11, 2013 by Aaron Michael Rich

[John Jaquish]

I couldn't be sure, but I would guess that it wouldn't. The mount's about 30mm to the end of the rubber gasket and there's only about 20mm of clearance at the bottom of the mount on the BL3 until it would reach the shutter.

[John Jaquish]

Still available. All reasonable offers considered.

[John Jaquish]

Now up for auction:

 

http://www.ebay.com/itm/331077560537