jim m Posted October 3, 2005 Share Posted October 3, 2005 Hello I bought a stack of films and a couple of projectors at a yard sale this weekend. I know everything about making good DV but don't have a clue on how to thread one of these babies properly. I have a Eumig Mark s-709 projector. A few questions: 1. Are you supposed to thread the film with the manual knob frame by frame or thread it like a reel to reel tape player 2. I am not getting sound. I have located the volume knob. 3. What is the difference between the S and N switch 4.What is the dial on the back that goes from 1-10 5. There appears to be two routing paths for S and N 6. In the case there are a couple of different adapters for the contraption that is placed infront of the light source for the fram being shown. What is it. I would appreciate any enlightening anybody could share Thanks ! Link to comment Share on other sites More sharing options...
P.W. Shelton Posted October 3, 2005 Share Posted October 3, 2005 Hey there, I'm certainly no expert on projectors but it sounds like the S and N are for super and regular 8. Determining the type of films you have will determine the correct film path. You probably have some super 8 films if you purchased them together. As far as sound goes you might not have reels with sound striping. I would suggest going to this website to do more research. You can probably find a manual here for your projector http://homepage.mac.com/onsuper8/ Good luck :D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now