Shawn Sutherland
-
Posts
6 -
Joined
-
Last visited
Posts posted by Shawn Sutherland
-
-
Since I don't have a focus puller, I need the lens to do all the work. Which lens do you recommend and what setting should I use?
-
Blackmagic Pocket Cinema Camera 4K in Canada.
Where can I buy it?
-
OK, let me try a simpler question:
Is there a matte box that works with the Tokina 11-16mm f/2.8 lens?No filters or f@*#k-All, just the lens.
As in this one: Tokina 11-16mm f/2.8 lens: http://vistek.ca/sto....for-nikon.aspx
?????? -
Speaking of Matte Boxes.....
You guys seem to know a thing or two about them, so...
I own the NEX-FS100, a Tokina 11-16mm f/2.8 lens, and a Genus 77mm ND filter:
Tokina 11-16mm f/2.8 lens: http://vistek.ca/store/CameraLenses/...for-nikon.aspx
Genus 77mm ND filter: http://vistek.ca/store/CameraFilters...-nd-fader.aspx
OK here's what I need help with:
I need a matte box that works with this lens/filter combination, doesn't vignette with the Tokina at 11mm on my NEX-FS100, but still allows access to the ND filter ring.
I might be asking for too much here, but I'll ask anyway just on the off chance that somebody actually got this working on their camera. -
Hi all:
I previously used a Blackmagic declink/SDI card to capture from my EX1 XDCAM -using the "uncompressed"/"raw" (HD/SDI Out) BNC connector. The decklink would only capture at 1080i@59.9 Hz uncompressed AVI (v210) format. It wasn't that bad, but I wanted MORE!
So, I went out and bought a Matrox MX02 le with MAX because I wanted to capture uncompressed SDI-out 10-bit at 1080p x 24 fps (NTSC).
Instead, the only way I could see the output of the Sony EX1 via the SDI-In of the MX02 was by setting the "Project Format" to 720p@59,94 fps.
What am I doing wrong here?
Has anyone else experienced this problem using a Sony EX1 (SDI-Out to MX02 SDI-In) ?
Regards, and thanks ahead for any feedback/help you can offer.
Shawn
Blackmagic Pocket Cinema Camera 4K on a Steadicam.
in BlackMagic Design
Posted