Alain LeTourneau

Century Precision Optics DSFA8200 Rectangular Sunshade

Works with DS Series Wide Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter, 80mm front with 75 to 80 step-up ring. Lightly used, excellent condition.

$75 + shipping

Contact Alain at 503-231-6548 or letourneau(dot)alain(at)gmail(dot)com.

For Sale - CP16/A

CP-16/A camera body and one PLC4-A magazine.

Camera needs an overhaul, does not include batteries or lens. Service work would run around

$500-800 as quoted by several CP service technicians.

$95 + shipping

Contact Alain at 503-231-6548 or letourneau(dot)alain(at)gmail(dot)com.

FOR SALE - Eclair NPR parts

!Buyer pays shipping on all items!

ECLAIR NPR body #1555

?Variable shutter 15-180 degrees.

?Lateral pressure shoe and registration pin.

?Two lens turret: Arri B mount and C mount.

Includes lens port caps (Arri B and C mounts), viewfinder cover (original metal

cap), gate cover, and extra bottom plate to cover motor coupling when motor is

disconnected. This camera needs a complete overhaul. Optical Electro House quoted me

$900 after George Zorzoli inspected the camera in his shop. Ground glass has

markings for 1.33 full frame only, no TV pumpkin, no cross hairs. This is a somewhat

rare camera in the States, as I've seen dozens of NPRs and not one without the TV

pumpkin on the ground glass, or an Arri B mount, and this camera has both. This NPR

is well worth the overhaul.

$600

ANGENIEUX Orientable Viewfinder for NPR #1055

This comes with metal cap to protect threads/glass, and Arri rubber eyecup. This eyepiece

is in excellent condition and makes your NPR into a new camera.

$650

AATON ALCAN motor 24/25fps, and variable speed 5-32fps. Very good

condition. This motor shutter parks in the viewing position, lowers the NPR's height

by three inches, and lowers its weight by approximately four to five pounds.

$650

AATON ALCAN motor 24/25fps. Very good condition. This motor shutter parks in the

viewing position, lowers the NPR's height by three inches, and lowers its weight by

approximately four to five pounds.

$500

[ NOTE about Alcan motors: Andrew at AZ Spectrum can modify the Alcan to run

multiple crystal speeds for $900. ]

Additional parts:

NPR 400' magazine for parts (magazine is completely dis-assembled). Late-model

magazine with two piece pressure plate, includes core flanges.

$85

Angenieux metal lens shade for 12-120 & 10-150, holds s9 filter.

$30

Metal cap for NPR's viewfinder port, rare.

$30

Contact Alain LeTourneau at 503-231-6548 (Portland, Oregon)

or letourneau(dot)alain(at)gmail(dot)com.

REVISED LIST

Buyer pays shipping on all items.

Windjammer for PD-150, 170, etc, on-camera mic. Fits over windscreen.

$15 each

Aaton case, rigidized, fitted (British-style) for LTR/XTR.

$50

ISCO 35-65mm f1.3 projector zoom lens, 42.5mm mount.

$125

Century Precision Optics DSFA8200 Rectangular Sunshade - Works with DS Series Wide

Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter. 80mm front with

75 to 80 step-up ring. Lightly used.

$75

CP-16/A camera body and one PLC4-A magazine. Camera needs an overhaul, does not

include batteries or lens. Service work would run around $500-800.

$95

REVISED LISTED, SOME REVISED PRICES

Buyer pays shipping on all items.

Windjammer for PD-150, 170, etc, on-camera mic. Fits over windscreen.

$15 each

Harrison change bag 26"x30", like new.

$40

Aaton case, rigidized, fitted (British-style) for LTR/XTR.

$50

ISCO 35-65mm f1.3 projector zoom lens, 42.5mm mount.

$125

Century Precision Optics DSFA8200 Rectangular Sunshade - Works with DS Series Wide

Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter. 80mm front with

75 to 80 step-up ring. Lightly used.

$75

CP-16/A camera body and one PLC4-A magazine. Camera needs an overhaul, does not

include batteries or lens. Service work would run around $500-800.

$95

Is your Harrison changing bag still for sale?

Scott,

YES, the change bag is still available.

Contact me at letourneau(dot)alain(at)gmail(dot)com

-Alain

I thought I'd post another person's findings after they contacted AZ Spectrum.

Andrew can do speed modifications to the Alcan for $900. If you are familiar with Andrew's work then you know it's good, and this is a decent price for having variable speeds on a motor that makes the NPR a wonderful camera to operate.

-Alain

OPEN CALL FOR 16mm SUBMISSIONS.

To all filmmakers shooting on 16mm and printing on 16mm or 35mm, 40 Frames would

like to preview your work for consideration in our on-going exhibition program.

Please send NTSC VHS/DVD pre-screeners to the address below.

40 FRAMES

425 SE 3rd, #400

Portland, OR 97214

United States

Regards,

Alain LeTourneau

Pamela Minty

Hi, Does anybody tried this Geman film Kahl Ut 18 chrome? Is It worth of testing?

Antonio,

What are you referring to? Never heard of Kahl? What format - 16 or 8?

-Alain

Still available!

-Alain

REVISED LIST - new prices!

Windjammer for PD-150, 170, etc on-camera mic. Fits over windscreen.

$15 each

Harrison change bag 26"x30", like new.

$40

Aaton case, rigidized, fitted (British-style) for LTR/XTR.

$50

Movie screen 9'x6', acoustic perf, new.

$60

ISCO 35-65mm f1.3 projector zoom lens, 42.5mm mount.

$150

Century Precision Optics DSFA8200 Rectangular Sunshade - Works with DS Series Wide

Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter. 80mm front with

75 to 80 step-up ring. Lightly used.

$85

CP-16/A camera body and one PLC4-A magazine. Camera needs an overhaul, does not

include batteries or lens. Service work would run around $500-800.

$100

SOLD!

-Alain

What is your opinion on the Kodak Analyst, Alain?

Best regards,

Ken Hale

I can't recall having studied an Analyst closely for steadiness at 24fps projection.

I have a friend in Van BC who has two that he uses for dual projector performances, but it's mainly

to slow things down.

I would imagine it is as steady as a Kodak Pageant, which can be laterally steady, thanks to well designed guide rails, but vertically it can develop play requiring the claw pitch to be adjusted. Lamp

and optics are the limitation of the Pageant, otherwise the movement is very good, very easy on film.

-Alain

Does this one have variable speed and running for eclair NPR?

Could I DIY to set it up?

This motor is NOT variable speed. It is 24 and 25 fps crystal speeds only.

Talk to Andrew at AZ Spectrum to determine if you can have the motor modifying to run variable speeds.

-Alain

Hello Nathan,

We just started using a Lafayette analytical projector, and it works great.

Real steady.

Ken Hale

Ken,

Is Lafayette a Kodak Analyst projector with a Lafayette nameplate?

-Alain

I left out another option....

Eiki EX-4000 was intermittant and a manual threader. I've seen some coming up on eBay lately.

-Alain

ECLAIR NPR 16mm crystal sync camera package

?Variable shutter 15-180 degrees.

?Lateral pressure shoe and registration pin.

?Perfectone motor (24/30fps crystal).

?Two lens turret (CA-1 mount with Arri B adapter, C mount).

Package includes:

Eclair NPR #2198

Overhauled Oct 2006 by Optical-Electro House

-Kinoptik finder x2 (light trap broken on one)

-Arri-B adapter

-Lens port caps (Arri B, CA-1, and C)

-Aperature plate cover

-2x Perfectone 24/30 crystal motors

-1x motor craddle

-1x motor for parts or conversion

-Camera case 20"x15.5"x8.25"

-2x mags (late-model, two piece pressure plate)

-1x mag for parts

-Fitted two magazine case 14.5"x10.5"x10.5"

-Angenieux 12-120/T2.5 CA-1 mount (front and rear caps)

-Angenieux 12-120/T2.5 B mount (front and rear caps)

Kit includes NO batteries

$2850 + shipping

Call or email Alain at 503-231-6548 or letourneau(dot)alain(at)gmail(dot)com.

REVISED LIST

Windjammer for PD-150, 170, etc on-camera mic. Fits over windscreen.

$25 each

Kodak Bi-focal converter for Kodak Pageant projectors, turns standard 50mm into 41mm and

65mm, some scratches, but does not effect performance.

SOLD!

Harrison change bag 26"x30", like new.

$45

Aaton case, rigidized, fitted (British-style) for LTR/XTR.

$80

Kintek K-21 mono optical audio processor.

SOLD!

Movie screen 9'x6', acoustic perf, new.

$75

ISCO 35-65mm f1.3 projector zoom lens, 42.5mm mount.

$175

Century Precision Optics DSFA8200 Rectangular Sunshade - Works with DS Series Wide

Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter. 80mm front with

75 to 80 step-up ring. Lightly used.

$125

Aaton Alcan motor for NPR, 24/25fps crystal.

$500

CP-16/A camera body and one PLC4-A magazine. Camera needs an overhaul, does not

include batteries or lens. Service work would run around $500-800.

$165

AATON ALCAN MOTOR

24/25 fps crystal

$500 + shipping

This is buried in another listing, but I thought I should list it separately, since I had a number

of folks on the forum asking me if I would sell my Alcan separate from a package I was selling.

-Alain

FOR SALE

Buyer pays shipping on all items.

Windjammer for PD-150, 170, etc on-camera mic. Fits over windscreen.

$25 each

Kodak Bi-focal converter for Kodak Pageant projectors, turns standard 50mm into 41mm and

65mm, some scratches, but does not effect performance.

$50

Harrison change bag 26"x30".

$45

Aaton case, rigidized, fitted (British-style).

$80

Kintek K-21 mono optical audio processor.

$100

Movie screen 9'x6', acoustic perf, new.

$75

ISCO 35-65mm f1.3 projector zoom lens, 42.5mm mount.

$175

Century Precision Optics DSFA8200 Rectangular Sunshade - Works with DS Series Wide

Angle and Telephoto Adapters, Accepts One 82mm Screw Type Filter. 80mm front with

75 to 80 step-up ring. Lightly used.

$125

Aaton Alcan motor for NPR, 24/25fps crystal.

$500

CP-16/A camera body and one PLC4-A magazine. Camera needs an overhaul, does not

include batteries or lens. Service work would run around $500-800.

$165

Contact Alain at 503-231-6548 or email letourneau(dot)alain(at)gmail(dot)com.

but if it seems that using the smaller prime lenses will offer better image/lower fstops

is it worth the extra money for the sbm if I'll just find myself putting on a c mount adapter

most of the time anyway?

I use to just leave the C mount adapter on my SBM, then covered the lens port with a C mount cap.

-Alain

Yeah, I'm sure they would charge a premium for a custom made bag. Those best boy bags look really nice, but it also looks as though they're made of Nylon? Just out of curiosity, why are you going with canvas?

Because canvas is king?

I like the idea of buying a cotton canvas bag over nylon (even if cotton is one of the more heavily sprayed crops), and I find the material holds up

rather well. I have a riggers bag for tools (tons of pockets) which cost me I think $20, and a large LL Bean tote for all my rawstock, film cans, black

bags, extra camera cores, changing bag, and mag barney, and the white color is good for reflecting light/heat.

I've been using a nylon Lowe Pro bag that someone gave me, and while it works ok if I'm working out of a car I hate moving around with the thing. Not

very well designed if you ask me. I used to own a Domke F2 and always loved that bag, so I was wondering if anyone knew of bags similar to this. I think

I'll end up getting an F1X to suit my needs.

-Alain

Hey Alain,

 

I think you might have me mistaken on the Series 9's. I think the Domke might be your best bet- the only thing I have been able to find online are the standard canvas tool bags that you would find at any hardware store, which are obviously a much different bag than the Domke. Good luck in your search! For reference, there is a place on 23rd and Clinton if I recall called "Beckels Canvas" who might be able to custom make one, or modify your bag. I can't say for sure that they would do this, but I do know that they make canvas bags and tents and things like that. Might be worth checking out:

 

Beckel Canvas Products

(503) 232-3362

2232 SE Clinton St

Portland, OR

Yes, I have one of those "riggers bags" for my tools. They are great for hauling tools, but I'd like a bag that has a lid and a bit of padding for some protection. Beckel makes nice bags, I have a number of small canvas bags from them that I use for lighting clamps and such. Good suggestion about having them make one, however it seems that it would likely cost more than a Domke.

-Alain

Thanks Patrick...

I didn't know this company existed. I find the bags a little large, and expensive, and I will never understand why AC bags have to be black or dark blue.... not great colors for sitting out in the sun. At least Cinebags makes gray ones, but then they are still so large.... And BTW I'm looking for CANVAS not nylon.

I'll probably stick with the Domke, I just wish it was larger.

I seem to recall I was going to get some series 9 retaining rings from you, at least

I think that was you? Do you still have those rings? If so, let me know when you'll be in SE as I around

my studio most days, esp in the mornings.

-Alain

Can anyone recommend a canvas ditty bag that is similar in style to the Domke F-1X, but slightly

larger? I like the domke's top flap/lid and pocket design, but think the bag is a little small for my needs.

-Alain