kuni ohi

Thanks you both for replying. I've decided to go a lot simpler and erect a couple of 24" Lanterns outfitted with 1000W and boomed throughout each of the lobbies. I am also going to try replacing the bulbs and upping the wattage on the practicals in the area. I'm hoping that'll raise the ambiance and create enough believable texture in the areas.

hi, thanks for replying. The camera is rated at 320 and I think I might stop it down to 2.8 (I am just worried that if I put it @ 2 I'm going to endure complex focus pulls). The basic steadicam is that of a man walking (back to the camera) from the front entrance to the main lobby. Then the camera tracks to the right to see a second man at the registration desk. the camera then stays on the second man (track back, facing man) as he turns around and starts walking through both the main lobby and the room on the left. What I wanted specifically was to use a strong enough light to bounce off the 20-25ft dome ceiling and soft light the actors (make it look like the center of the room has a decent sized soft light in the middle) . The walls are lined with side tables and lamps so a strong practical element is evident in the shot. Plus, I'll occasionally push a hard light through a window to make it look like a mercury / sodium vapor. The main issue is that by nature the hotel is dimly lit so the director and I want to emulate it. We don't want it to look crappy but we also want it to look naturalistic as possible. If I can't get the nessesary light to bounce it off the ceiling, I'll most likely use a decent light and bounce it at a lower height. to emulate a soft source.

Hi, I am currently trying to light the interior lobby of a hotel for a steadicam shot at night. Unfortunately, its dim as hell. The basic layout when you come into the hotel is a 40 x 40 main lobby with a registration room to the right and another 40 x 40 room to the left. I am pretty sure I have the registration layout down but I am not exactly sure what I should do for the two large rooms. Both are topped off with a baige domed ceiling about 25 ft. (could be less) off the ground. The camera we're using is a HVX with a Letus Extreme Adapter and a 35mm Nikkor f2. I know that with the HVX's crappy low-light capabilities, the letus' half stop light-loss, and the lens f-stop closer to 4 its going to be extremelly dark. My initial idea was to use the dome ceilings as a giant bounce, but now I am even doubting the the validity of that. Anyways, if I were to go ahead with it, what light should I use to get a decent read? Would a 2k in each room suffice or would I need a couple for each? Any ideas would be greatly appreciative.