alan smith

Thank you. The slowest frame rate on the K-100 is 16 fps - which may or may not be of relevance. If it is equal in exposure (on single frame mode) to the Cine Special @ 8 fps, then I get to search for the shutter angle to compute the 8 fps exposure of the Special don't I. Again, thanks

Could I pester someone for information on the Kodak k-100? I'm interested in doing some single frame work, but I don't know the shutter speed. As a guess I would think it was the same as the 16 fps speed - 1/35 th. sec. If I'm not wrong. I'd be grateful for any tips, please.

Sorry, I really am screwed up. No, I'm not trying to convert to a reflex system. Too much of a Luddite to jump through that hoop. :angry: I like the non-reflex -- straight from the lens (preferably Zeiss or Cooke) to the film.

Pardon my lack of clarity, I've been sick. :P What I'm getting at is really simple. If I send a Non-reflex H-16 for conversion to S16, is there enough glass in the viewing prism on top, for them to widen the port (to allow a full frame view -- for composing and focus)? It's hard to imagine Bolex would have used a prism block wider than necessary for N16, of course I'm hopeing they did. Add some "lazer brightening" and a 13x finder from a late Reflex model -- sounds good to me. ;) Due to stroke limitations, I'm restricted to a "locked down" tripod anyway. I'm not trying to run about with a camera to my face or make the camera/viewer seem to be part of the action. Regardless, thanks for your responses

I'm assuming the pelical viewfinder mentioned is a superior type of viewfinder prism? I was going to inquire if the finder (10x/13x) from a Reflex model could be adapted to fit, but perhaps a bridge too far...

Let's try this again, I didn't get ANY responses to my last two questions - too stupid I guess. Onward -- If I sent my camera to someone? for conversion, would they enlarge the viewfinder gate to match (for framing purposes) the film gate? Is there enough meat in the ground glass/prism to do so? I guess I could tear the front off the camera and look for myself. I'm asking here hopeing someone has had the work done to their NON REFLEX Bolex. The service shops are either too busy to respond, or dismiss the issue with: "it's not worth the expense." Anyone???

The title pretty much covers it - a quick-'n-dirty S16 conversion. I've read here-bouts that the Kinetals (12mm up) cover S16. I've got a 25mm I'd use if it will cover a back yard conversion to a Bolex (or other) film gate. Any comments welcome - preferably re. coverage of S16 frame. Thanks, alan

Re. question 1. OK, I ordered an Arri adapter from England. I'm sure it will be very pretty. Re. question 4. I've communicated with three 'top shelf' S16 conversion/techs. and their consensus is: ''It's (a non-reflex H16) not worth the expense." -- sniff. Re. question 2. Best I can surmise (camera hasn't arrived yet) is that the focusing tube is cr. 6x. Re. question 3. I'm not holding my breath on a response. Here's an easy one for you Bolex experts: When viewed through the focusing tube, is the image 1. full frame? 2. upright but reversed side to side? -- Again, not holding my breath.

Yes thanks. I communicated with them when it was posted last week. Despite the assertion: "Optic: smooth focusing & clean glass optic, no dust or fungus, oil-free blades." there are no focusing optics with "oil-free blades" -- the only optics are the rear eyepiece and maybe a few lenses in the viewing tube. Anyway, the main drawback (to me) was the lack of specific focal length viewfinder optics. Back to my questions -- so far the only source for an Arri bayonet to C-mount adapter I've found is an offer to fabricate one for cr. $300 USD. Yipes! for a $300 camera! Again, yipes! Regardless, the heads up is appreciated. Thank you.

I've given up on finding a K-100 so, on to a non-reflex Bolex. Some questions please -- in order of importance: 1. Arriflex Bayonet to C-mount adapter -- availability? source? -- (just missed 3 on ebay). 2. What is the magnification of the top mounted focusing tube on the H16 non-reflex? 3. Is it possible to attach (without modification) The viewer from the H8 Reflex for it's 20x enlargement? 4. Is there anyone who sells S16 modified film gates and sprockets for DIY conversions? If I can't find a reasonably priced C-mount adapter then I'll make a turret with a CA1 mount, re-centered. TIA, alan

Pardon, got ahead of myself. Any focal length viewfinder optics (or port caps) would be of interest, especially the 10mm. Thanks.

If you have, or know of, a clean smooth running example available please PM/email. Thanks, alan

Seems to predate the 10mm -- nevermind. Thanks