Daniel Parmo
-
Posts
21 -
Joined
-
Last visited
Posts posted by Daniel Parmo
-
-
Paralinx ACE Video transmitter system. 1 SDI tx, 2 SDI rx, 1 HDMI rx. 2 BNC cables, 2 HDMI cables. 3 barrel to 2-in power cable, 3 barrel to D-tap power cable. 3 battery plates. 4 Sony NP-970 batteries. Dual charger. 2 power supplies. 2 SDI cables. 2 HDMI cables.
2200USD
Buyer pays shipping
Placed in Denmark, Europe
-
SOLD
-
Bump
-
Still for sale.
-
Bump
-
2100EUROS
-
2300euros
-
2500EUROS
-
2800euros
-
2900EUROS
-
BUMP
-
-
SOLD
-
Following Preston equipment for sale:
HU3 G4 w/5 premarked rings, 1 blank, 4 batteries, 1 charger, lanyard
VLC G4 w/ 15/19mm mounting bracket
Spare antenna
DM1x motor w/15mm rod mounting bracket and 19/15mm step-down ring
2 video gears, 1 standard cine gear, 1 wide cinegear
Hill PAM bracket (2 screws for the rosette missing)
Tool to change gear on motor
Cables for Arri(x2), Aaton, RED One, RED Epic and Sony
Pelicase 1450
Data cable for updating handset with usb adapter
11500USD
8600Euro
Based Denmark, Europe
daniel.p@rmo.dk
-
Following Preston equipment for sale:
HU3 G4 w/5 premarked rings, 1 blank, 4 batteries, 1 charger, lanyard
VLC G4 w/ 15/19mm mounting bracket
Spare antenna
DM1x motor w/mounting bracket and 19/15mm step-down ring
2 video gears, 1 standard cine gear, 1 wide cinegear
Hill PAM bracket (2 screws for the rosette missing)
Tool to change gear on motor
Cables for Arri(x2), Aaton, RED One, RED Epic and Sony
Pelicase 1450
12000USD
daniel.p@rmo.dk
-
Keep the deck attached to the camera if its connected then it can communicate to shut the fan off during the shooting like the red, if the decks not attached it doesn't have all the same communications. The camera should run silent, there is a way to mount the deck on incorrectly and have it only partially attached in which case you can really mess with the electronics, make double sure you've mounted it the right way.
Hi Rob,
Problem is that we're recording via BNC to a CODEX hard disc recorder. There is no SWR1 to trigger the silent mode, it is running constant in minimum mode.
Daniel
-
-
Hi, do you still have the bartech for sale?
SOLD
-
Bartech Remote focus for sale. S/N 0966.
Heden VPT28 motor.
2 motor cables.
15mm stepdown ring.
Cables for RED, Aaton, ARRI, video cameras.
Gears for film and video.
Large diameter 0.4 and 0.8 gears for even faster gear speed.
18 marking rings.
Hardwire cable.
15mm/19mm mounting bracket w/90 degree flip.
3 rechargeable 9v batteries with charger.
Watercase.
3000EUR or 4400USD. Buyer pays shipping
Daniel Parmo
1st AC/Focus Puller
Copenhagen/Denmark
daniel.p@rmo.dk
+45 40625582
-
Paralinx ACE
in Cine Marketplace
Posted
Bump
2000USD