Roberto Pirodda

i never shoot via red camera but for what i see on internet, , the red looks like computer generated/videogame images. Also shoots by HDCAM or Panasonic look video and not film! i think that tons of K resolution can't rival versus well shot Super8. Roberto

Hi Jamie , the friction speed selector now is dead. I take away the friction and the spring motor because they were very noisy for sound recording, moreover as you know, the spring motor has only 20 seconds run. Now, w/o friction, the electric motor runs more easily and sounds like a fly. I do not know any in UK that could do this job, but I do this job (cinecamera repair) from many years , i am optician. Regards. Roberto

no, the variable shutter is always there, it close up to about 90° max, so no fades now but more low light shoots

Hi Jean-Louis it is a mix- heavily customized camera:the inside mechanic comes from a DS8 round base, the chassis comes from a 16mm SB. i take the 1:1 drive gear from the mechanic of SB, so i can mount an ESM motor. moreover i widened the shutter angle from 170° to about 220-230°, untill maximum permitted by pull-down movement, gaining about 1/2 f-stop. the spring motor is removed, so the camera runs only with electric motor. i removed the friction-speed selector too, that was very noisy, now the camera runs like a fly. Gate widened to MAX8 by the way. Regards. Roberto

Hey, what about this camcorder-like optical ViewFinder? The only problem is that rotating the eyepiece rotates the image too, i am working to fix it. It is a 16X enlargement eyepiece from an oftalmic equipment, moreover the inside periscope prism has been replaced with 2 first surface mirrors. The image is panoramic and very sharp far better than original 13X VF.

Hi Chris, thanks for update.Centering for S16 is a complex job on turret cameras, moreover the upper and lower lenses will be out of centering, unless you rebuild a new lens plate. If the vignetting is your thought, take in considerationt that i tested the Berthiot 20mm Cinor and it cover full frame (from side to side) w/o vignetting. For wider angle i utilize a Peleng 8mm lens. The shutter has been cut untill maximum permitted by pull-down movement, and it (the pull down) seems equivalent to a recent system ( i did the same customization on a EBM )

New life to an old pull-down claw movement system non reflex camera body, that i converted to reflex (utilizing spare parts from a dead camera.)Serial number 33453. The cheapest way to afford Super16 and Ultra16 world!The gate has been widened to impress full frame. Then in postproduction it is possible to crop the frame to 16/Super16 or Ultra16 as desired.The film is hold perfectly flat in front of the gate from two rollers (see picture). The viewfinder has not be widened so display only the 16mm 4:3 aspect ratio. The lens plate is centered for 16/U16. The periscope prism inside camera has been replaced from two first surface mirrors: the images in the viewfinder are sharper. Despite this camera looks to be in poor shape, everything runs perfectly. Single frame (" I "and "T") is OK, spring motor runs steady for the first 20 seconds (total 25 seconds). The registration (frame by frame stability) is rocksteady untill 32fps, then becomes to be a little unsteady up to 64fps. To me it is more than acceptable, but it is for your knowledge. The shutter angle has been improved from originally 170 ° to about 220° gaining about one f-stop luminosity. So the shutter speed from 1/64 sec. becomes aproximately 1/46 sec at 24fps.The camera must only transport the film as steady as possible , put on this camera a good lens and you will be far over 2K resolution! Yes, by a recent research at Arri, every single S16 frame match 2K resolution, but when film runs, we have an averaging of multiple frames that improves the resolution. That is why motion picture technology is unsurpassed by video electronic, with its fixed pixel pattern (not to mention color rendition !) . If you have problems to find labs that telecine U16 write me, i have all telecine gates :8mm-S8/Max8-9,5-16/S16/U16 and 35mm(4 perfs), frame by frame scan, resolution up to 2560 horizontal pixels. For standard def. i utilize a 3ccd 850 tv lines sensor, for HD a 2/3" 3ccd progressive scan 2560X2048 scientific camera. + Kodachrome 25 film outdated 2003 but still good (stored in the freezer) READ CAREFULLY: being this camera a myself made customization, i will give you a TOTAL refund ( except for shipping cost) IF you will demonstrate that something goes wrong. For this reason i have included a roll of film that you will send back to me with the camera . This will allow me to verify the problem (if any). The package is about 5Kg. Shipping cost : Italy is 18 Euro Paccocelere 3. International there are two options: for fast shipping about 2-4 days delivery and tracking is 45 Euro for the Europe up to 60 Euro for the rest of the world, otherwise international standard shipping is 35 Euro but no tracking. Insurance (optional) is 5,68Euro. The camera comes with 1 lens cap. The price requested is 399 Euro ( the price for Super 16 modification only in my lab is 400 Euro !) Payment via paypal (preferred) or money order Don't esitate to ask for further informations! http://immagini.p2pforum.it/out.php/i421999_U16Area.jpg http://immagini.p2pforum.it/out.php/i422000_IMG0111.JPG