Mark Burten
-
Posts
37 -
Joined
-
Last visited
Posts posted by Mark Burten
-
-
Bartech Motor cable still available (Pictured at bottom). $40 shipped.
-
Bump. ET EVF Extension still available. $70 shipped.
-
Still have the Viewfactor Origo and the Bartech Analog Motor Cable
$100 for Origo. $50 for the Bartech Cable.
-
Bump up. $160 each or $300 for the pair.
-
-
Angenieux 70-210 F3.5 Zoom Lens
- Leica R Adapted to Canon
- UV Filter
- Focus RingsThe F3.5 is consistent throughout zoom range. Also has good short focus macro. Manual Iris/Focus/Zoom but still very lightweight for this range. Smooth rings and good amount of focus/zoom travel vs most DSLR Lenses. Love the look, resolves nicely. Don't know of any other zoom that compares without going PL or big $$ for manual control.
$1000 OBO
PM or Email
mbentgroup + gmail
-
Bump up.
MDR DTap Power - $60
Arri S/S Power - $85
RED One S/S - $65
Looking for offers on the Origo.
-
RED LCD/EVF Cable is sold.
-
Pricing includes shipping to US. Fedex avail.
Preston MDR 1 or 2:
DTap Power Cable (4Pin Lemo) - $60 NEW
Red One Stop Start (RS422) - $75 NEW
Arri Power + Stop/Start (3 Pin Fischer) - $100Bartech:
MOne, Loon, Etc Analog Motor Cable - $50Viewfactor:
Origo Stop Start Trigger with RT Angle Cable - $125 OBO
PM or Email:
mbentgroup + gmail + com
-
Last bump before sending this off to eBay. Send in your offers.
-
Adding a Switronix 4 Way V-Mount Charger -- $800 OBO
https://www.bhphotovideo.com/c/product/592184-REG/Switronix_XC_4LSRED_XC_4LSRED_4_Position_RED.html
All monitors are sold.
Still have the Filters, O'Connor AKS, MDR Cables, and Bartech (pending a few offers).
-
138mm One-Stop -- $225 (open box new)
138mm Circ Pola -- $200
Formatt 4x5.65 Hot Mirror -- $200
Dovetail -- $200
Dropping the Bartech down to $3750.
Teradek Kit for $1800.
I'll start a new thread and divvy these up a little for ease of searching.
-
$3850 for the Bartech with case.
Also have:
138mm Schneider One-Stop Circular Polarizer (Drop-In)
138mm Schneider Circular Polarizer (Drop-In)
12" Element Technica Dovetail (Arri Style)
-
TVLogic Sold.
$3900 for Bartech with the case. $3850 without.
$1900 for the Teradek.
Panasonic, Teradek, and Bartech prices include shipping if you're in the US.
-
Everything is in good shape, clean and well maintained. No rental gear, so its well cared for.
Email -- mbentgroup AT gmail
Or PMTVLogic 058W 5.5" Monitor -- $1100
1 - LP-E6 Batt Plate
1 - Sony L Batt Plate
1 - AC Power
2 - DTap Power Cables
1 - Plexi Cover
BNC and 1/4-20 Adapters[A few have asked for opinions on the 058W as a SmallHD 502 owner. The TVLogic is a workhorse with its hard buttons and easy programming. Its slightly sharper, I trust the color a little more (and highlights), and its incredibly reliable. It also manages every format properly, so you aren't thrown a curve ball with weird wireless signals or video feeds. Audio is managed properly too with embedded sources. Arguably the best avail if you're an AC.]
Teradek Bolt Pro 300 3G-SDI (Receiver and Transmitter) -- $1950
1 - AC Power
1 - DTap Power Cable
1 - 5/8 CStand Adapter
1 - Hot Shoe Adapter
1 - 1/4-20 ThumbscrewBartech Digital Wireless Follow Focus Kit -- $3950 OBO
1 - Handset with Center Marking Disc and Lanyard
1 - Heden M26VE Digital Motor
1 - Digital V1 Receiver
2 - Receiver Antennas (Straight and Right Angle)
2 - Handunit Antennas (Long Range and Short)
2 - Motor Cables (Straight and Right Angle)
2 - DTap Power Cables
1 - RED One Stop Start Cable
1 - Epic Stop Start Cable
1 - Arri Power / Stop Start Y-Cable
1 - 15/19mm Motor Adapter
1 - 15/19mm and 5/8" Mounting Bracket (Handunit or Receiver)
12 - Marking Rings
1 - Case-- Preston MDR1 Cables --
1 - Epic Stop Start Cable (DTap / BNC Combo) --- $100
1 - Arri Power / Stop Start Y-Cable (3 Pin Fischer) --- $150
1 - RED One Stop Start Cable --- $100Panasonic BT-LH1760 17" Monitor -- $1400 OBO
1 - Vesa V-Mount Battery Bracket (Has V-Mount Plate Installed)1 - D-Tap to XLR Cable
1 - Hoodman 1700 Hood w/ Rain Cover
1 - Plexi Screen Cover
1 - Power Cable
1 - Pelican Case w/ Foam[This is the upgraded 17" model with 120Hz and Split Screen. No Table/Desk Stand]
-- O'Connor Support Gear --
1 - Mitchell to 150mm Bowl Mount Adapter - Part 08360 ($595 New) --- $350
includes tie-downs.1 - O'Connor 150mm Base Mount - Part 08278 ($409.50 New) --- $200
1 - Filmtools / Alan Gordon 150mm Hi-Hat - ($185 New) --- $110
no base included. comes with hardware. -
Sold to a happy old schooler. Thanks for the interest.
-
Everything is sold. Thanks for the interest. Will send PM's if I part ways with more support (2575's) in few weeks.
-
$6400 shipped on the Mitchell set. PM for details.
-
$500 shipped. Who wants a nice backup MDR for their classic FIZ? PM or post here.
-
$600 or better offer for a nice MDR. Send me a PM or post here.
-
Dropping down to $6500 for the mitchell sticks and head. Post here or send a PM if you're interested in a deal.
-
Mattebox is sold.
Open to offers on the O'Con gear.
-
$700 shipped for the MDR or reasonable offers. Thanks.
-
Hey guys, I have a few more I'm tossing up for sale this week:
-- 2060HD (with case) + Standards & Babies. I'll throw in adapters and a euro ball hi-hat too. Sticks are Mitchell but you can grab a Matthews or Backstage bowl adapter if you want to go euro/150mm. The head is ready to rock for either Mitchell or Euro ball.
*** $7000 and its all yours.
-- MB20II Mattebox
One more up for grabs. We bumped to 6x6's, so this box has to go as well unfortunately. Great 3 Stage ready to go.
Three 4x5.65 trays, Flags (Top and Sides), Mattes, Bellows, 114-110 Ring, 100 and 80mm plus 19mm Rod Adapter
*** First $2950 takes it.
FS: Contax / Zeiss Prime Lens Set (Stock)
in Cine Marketplace
Posted
Great looking set. Tough to find good 35, 135, and 21 in MM.