Bob Seiboth

Thank you Jason, that explains it. I wondered myself if that might be the case since the 3 pin remote connector looks almost like a different manufacturer. This EM motor came with a cable with the same mystery connector on both ends so I could probably replace one cable end with a 4 pin XLR and be done. Now I need to find the pin out so I don't blow anything up... Appreciate you taking the time to look into this! All the best, Bob

Hello, Has anyone ever worked with the EM motor? Wasn't planning on using sound so this seemed like a good alternative but I can not locate the connectors. The 4 pin power connector has the 4 pins in a square format, while all the Amphenol connectors I've investigated have the 4 pins in a more trapezoidal shape (I didn't do well in geometry; the 2 upper pins are closer together than the 2 lower ones...) - Here is a pic of the EM connector - No manufacturer data on the plug. The bakelite piece is ~ 11.6mm diameter - Any suggestions?? I have one cable complete that came with the motor (no battery), but need a panel type connector for a DIY battery pack.