Search the Community
Showing results for tags '3C'.
-
Two ground glasses for sale. For use with an Arri 2C, 3C, 35-3 film cameras or Kish UDF or other Dir/Find that uses this type of ground glass. $200 for both OR: $150 for the one with the metal handle (in slightly nicer condition) with Academy 1.85 and what looks like Academy 4x3 (common sides). In blue ARRI jewel case. $100 for the one without handle (a couple of tiny blemishes, visible in photos), marked with Academy 1.85 and a "TV" that is not common sides or top/bottom. The 1.85 marking is the dominant marking on this one. Both have tiny chips outside of the picture area. Both have center cross-hair. Located in Brooklyn, NY. Thanks for looking.
- 14 replies
-
- Groundglass
- arri
-
(and 8 more)
Tagged with:
-
I purchased this Arri 3C in the big Otto Nemenz auction around the middle of last year. I did a registration test with good results but have not had a chance to use the camera. Includes: - Arri 3C Camera body with PL mount port cap, body (magazine) port cap, accessory mounting bracket, Super 2.35 ground glass (could be Super 2.40, not sure) in shipping case. - Cinematography Electronics Crystal Motor Base (could also be used with an Arri 2C) - Arriflex 3C Crystal Handgrip Motor with screws and gear in plastic cup. - 6x 400' Arri 3 mags in 2x 3-hole mag cases - Jurgen's Orientable Video Door for 3C with Sony Color CCD camera. - Wide Angle Eyepiece (no rubber eyecup is included) - Arri grease - Arri Hand Held Door for 3C PICTURED BUT NOT INCLUDED: Extension Eyepiece. NOT INCLUDED: Rubber Eyecup, Power cables for camera motors to battery, power cables for Sony Color CCD, Balance Plate Top, Dovetail, Rods, Batteries, Lenses, etc. If you're not familiar with the 3C, you could think of it as the final refinement of the 2C before the Arri 35-3 came out. It has a more sturdy hinged door, unlike the metal prongs which held on the 2C door to the body. That design was never intended for the weight of a Jurgen's door and I've seen a few 2C bodies that are wearing out where these prongs grip. The 3C came from the factory with a PL mount, and it has a very nice crystal handgrip motor which is often sought after since it works just as well on the 2C. Something else I like about the 3C, they have a variable shutter, something that's hard to find on a 2C. The 3C also has a rosette for mounting accessories, right by the inching knob. The 2C doesn't have that. The 3C movement is the same as the 2C movement and motors, mags and of course ground glasses are interchangeable. The 3C is perhaps best know as the camera Arri made for the film "Das Boot" in the early 1980's. This means this camera isn't nearly as old as most 2Cs floating around out there. I know of four doors made for the 3C, although this package only includes two: Arri Orientable Door (which I've seen can be modified into a video split door) Arri Hand Held Door (included) Arri Straight Door (with optional anamorphic desqueeze module) Jurgen's Video Door (included) I should note, the door type is hinged, but it is not interchangeable with the Arri 3 door. The 3C doors are more rare, as not many of these cameras were made. Also, please see the picture with the note about compatibility with certain lenses due to the PL mount being centered for S35 (as opposed to Academy). Available for only $1,600 O.B.O!!! Available to see in Montebello through Tuesday 12/3. If that's too soon, I can coordinate another time for a relative of mine to show it to you since I'll be heading back out of town. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. More pictures on flickr! http://www.flickr.com/photos/95212445@N02/sets/72157633346930378/ Please send me a private message if interested. Thanks for looking! Rich
-
$900 Or Best Offer. Very rare item, in very good condition. These were only made circa 1982 for the Arri 3C, but are compatible with the 2C as well. 24 or 25 fps crystal switchable. Or, switch to variable mode (non-crystal) for other speeds. I was told the small 4-pin port is for connecting a speed controller for getting crystal sync at other speeds. Powers from 12V 4-pin XLR connector. Can run forwards or reverse - it has a switch for that. It needs a phenolic gear to connect to the drive gear at the bottom of the camera, but that's included with this motor. The motor has captive screws to attach to your 2C or 3C. No power cable included. This item is currently in Los Angeles with a friend. Thanks, Rich
-
For sale is my beautiful 2-perf (Techniscope) Arri 3C (IIIC) camera package. This camera was never a rental and it looks like it's hardly ever been used, it's in such beautiful condition. I've owned it since 2009 and during that time I found and bought an original Arri factory 2-perf conversion kit, which was installed by the technicians at Clairmont Camera in North Hollywood. I'm guessing everyone here knows why 2-perf is so great. But just in case... basically you get twice the run time from the same amount of film. A 400' roll of 35mm film running at 24 fps lasts about 8 minutes instead of the usual 4 minutes. A 200' short end is suddenly not a pain to work with since it lasts about 4 minutes. So that means you spend half as much money on film stock and processing since that's paid by the foot, too. The aspect ratio is naturally 2.40:1 at the gate so it's well suited to that cinemascope look, but much less expensive than anamorphic on film stock/processing (not to mention lens rental costs). If you wanted to shoot 1.85:1 on this camera, you could have the ground glass pencilled with two vertical lines to create 1.85 within the 2.40, and you'd still have roughly twice as much negative area than if you shot 1.85 on Super 16. I know of a feature film that just wrapped which did exactly that. Some recent and beautifully-shot 2-perf films: "Hunger", "Shame", "The Place Beyond the Pines", "American Hustle", "The Fighter", "Silver Linings Playbook", to name a few. Includes: - Arri 3C Camera body with PL mount port cap, body (magazine) port cap, in custom shipping case - Custom-made by Shurco 2-perf 2.40:1 Arri-3 style ground glass, with clear plastic case - Panavision (PV) Mount (PL mount currently installed, centered on Academy, not Super) with some shims - Cinematography Electronics Crystal Motor Base (could also be used with an Arri 2C, best motor you can get for these cameras) - Arriflex 3C Crystal Handgrip Motor (12V) with screws and gear (could also be used with an Arri 2C, a very rare item) - Italian Flatbase Motor Adapter Plate for above handgrip motor (ECE - ROME), untested - Custom Samcine Hand Held Support Brackets for IIC/IIIC in small hard shipping case - 2x 400' Arri 3 mags in a 2-hole mag case - 4x 200' Arri 3 mags in a 4-hole mag case. Note, two of the mags need some minor servicing. One looks like it's never been used - 2x 400' Fromm Shoulder Mags with spare rubber belt drives and 1x adjustable shoulder bracket (no case) - Jurgen's Orientable Video Door for 3C with Sony Color CCD camera - Arri Hand Held Door for 3C - Arri Orientable Door for 3C - Arri Straight Door for 3C with 2x Anamorphic desqueeze lever - Flat cover for above Straight Door if anamorphic dequeeze module is to be removed - Wide Angle Deniz Eyepiece with rubber eyecup that has shutter that can close - Spare Arri Eyepiece with rubber eyecup -push eye against eyecup to open shutter type, helps prevent light leaks - 1x Jurgen's Extension Eyepiece - 1x Arri Extension Eyepiece - 1x Arri Right Handgrip (no on/off switch) Arri Rosette style attachment - 1x Rosette to Rosette extension arm (adapter bracket needed/not included to use with above handgrip). Bracket pictured in hand held mode is not included) - 1x Unknown Brand Balance Plate Top A35/S35 switchable, like BP-9 (for 15mm rods) - 1x Van Diemen Balance Plate Bottom (Dovetail) ~12" - 2x 12V 4-pin XLR to 4-pin XLR power cables, one with a pigtail - 3x Power Cables for Jurgen's Video Door - 2x Medium Carbon Fiber rods (15mm) - 2x Medium rods (15mm) - 2x Short rods (15mm) - 1x SR2/SR3 type LWS 15mm bracket with 2x screw-in extension rods (for attaching to front of CE Flat Crystal Motor Base - Arri grease The inching knob (shutter/frame advance knob) has three holes drilled in it which was done to attach a hand-crank module from Clairmont Camera for a commercial (shot before the 2-perf conversion). Due to the 2-perf conversion, the Cinematography Electronics Crystal motor base does not count footage correctly. Simply divide the readout by half for an accurate footage count. I've created an album on Flickr with quite a few photos. On the wide photo with everything, you may notice two smudges. I've erased two items which I realized after the fact have no relevance or use with this package. I've also included some frame grabs from a music video I made with this camera after the 2-perf conversion. It was a joy to shoot with, performing flawlessly with not one instance of a hair in the gate. It was almost entirely shot with short ends of 200' or less. If you're not familiar with the 3C, you could think of it as the final refinement of the 2C before the Arri 35-3 came out, mostly designed as a result of engineering Arri did to the 2C for the German WW2 film "Das Boot". It has an orientable door which keeps the horizon level as you reposition the eyepiece up or down (on the 2 doors here that let you swivel the eyepiece up/down). It has a more sturdy hinged door (not interchangeable with the Arri 35-3 door), unlike the metal prongs which hold the 2C door to the body. That design was never intended for the weight of a Jurgen's video door and I've seen a few 2C bodies that are wearing out where these prongs grip, making it risky that the door could fall off. The 3C came from the factory with a PL mount, and it has a very nice crystal handgrip motor which is often sought after since it works just as well on the 2C. Something else I like about the 3C, they have a variable shutter, something that's hard to find on a 2C. The 3C also has a rosette for mounting accessories, right by the inching knob. The 2C doesn't have that. This is a beautiful example of the very rare Arri IIIC. The 3C movement is the same as the 2C movement and motors, mags and of course ground glasses are interchangeable. It took me many years to assemble this package so at least initially, I won't consider splitting off pieces of it. That said, feel free to get in touch if you're interested in something, and I'll keep you in mind. Available for $6,500 Or Best Offer. Available to see in NYC or Los Angeles, if you cover shipping costs to LA. For convenience, preference will be given if there is a buyer in the NYC (1st) or Los Angeles (2nd) area who will pick up in person and pay cash. I live in NYC but have friends/family in LA who can coordinate a sale in LA for me. Please check out the pictures and shoot me a private message if you're interested or if you have any questions. Thanks for looking! Rich https://flic.kr/s/aHskwM83a3
- 32 replies
-
- 2
-
- 2-perf
- techniscope
-
(and 8 more)
Tagged with:
-
$750 Or Best Offer. If you own an Arri 3C and want to shoot anamorphic, this is something you'll want. You can shoot spherical, or flip a switch and the optics will desqueeze the anamorphic image so you don't have to frame up your image with everyone looking skinny. A very rare door, unique to the 3C, so certainly nice to have if you ever want to shoot anamorphic on this camera. Thanks, Rich
-
$1,000 Or Best Offer. This item is currently located with a friend in North Hollywood, CA. I'm based in Brooklyn, NY. For sale is this very rare Arri 3C Crystal Pistolgrip Motor. It's in very good condition for it's age. These were only made circa 1982 for the Arri 3C, but are compatible with the 2C as well. 24 or 25 fps crystal switchable. Or, switch to variable mode (non-crystal) for other speeds. I was told the 4-pin port is for connecting a speed controller for getting crystal sync at other speeds. Runs forwards or reverse (via switch). Powers from 12V 4-pin XLR connector. No power cable included. The motor has captive screws for attaching to your 2C or 3C. Needed phenolic gear is also included. Photos: https://flic.kr/s/aHskUsmaU7 Thanks, Rich
-
I purchased this Arri 3C in the Otto Nemenz auction middle of last year. I did a registration test with good results but have not had a chance to use the camera for anything else due to personal reasons. Includes: - Arri 3C Camera body with PL mount port cap, body (magazine) port cap, accessory mounting bracket, Super 2.35 ground glass (could be Super 2.40, not sure) in shipping case. - Cinematography Electronics Crystal Motor Base (could also be used with an Arri 2C) - Arriflex 3C Crystal Handgrip Motor with screws and gear in plastic cup. - 6x 400' Arri 3 mags in 2x 3-hole mag cases - Jurgen's Orientable Video Door for 3C with Sony Color CCD camera. - Wide Angle Eyepiece (no rubber eyecup is included) - Arri grease - Arri Hand Held Door for 3C PICTURED BUT NOT INCLUDED: Extension Eyepiece. NOT INCLUDED: Rubber Eyecup, Power cables for camera motors to battery, power or video cables for Sony Color CCD, Balance Plate Top, Dovetail, Rods, Batteries, Lenses, etc. If you're not familiar with the 3C, you could think of it as the final refinement of the 2C before the Arri 35-3 came out. It has a more sturdy hinged door, unlike the metal prongs which held on the 2C door to the body. That design was never intended for the weight of a Jurgen's door and I've seen a few 2C bodies that are wearing out where these prongs grip. The 3C came from the factory with a PL mount, and it has a very nice crystal handgrip motor which is often sought after since it works just as well on the 2C. Something else I like about the 3C, they have a variable shutter, something that's hard to find on a 2C. The 3C also has a rosette for mounting accessories, right by the inching knob. The 2C doesn't have that. The 3C movement is the same as the 2C movement and motors, mags and of course ground glasses are interchangeable. The 3C is perhaps best know as the camera Arri made for the film "Das Boot" in the early 1980's. This means this camera isn't nearly as old as most 2Cs floating around out there. I know of four doors made for the 3C, although this package only includes two: Arri Orientable Door (which I've seen can be modified into a video split door) Arri Hand Held Door (included) Arri Straight Door (with optional anamorphic desqueeze module) Jurgen's Video Door (included) I should note, the door type is hinged, but it is not interchangeable with the Arri 3 door. The 3C doors are more rare, as not many of these cameras were made. Also, please see the picture with the note about compatibility with certain lenses due to the PL mount being centered for S35 (as opposed to Academy). Available for only $2,000 O.B.O!!! Available to see in West Hollywood through this Saturday. After that, get in touch and I can coordinate a time when you can check it out. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. More pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633346930378/ Please send me a private message if interested. Thanks for looking! Rich
- 1 reply
-
- ArriArriflex
- 3C
- (and 5 more)
-
I purchased this Arri 3C in the big Otto Nemenz auction around the middle of 2012. I did a registration test with good results after buying it but have otherwise not used the camera. Includes: - Arri 3C Camera body with PL mount port cap, body (magazine) port cap, accessory mounting bracket, Super 2.35 ground glass (could be Super 2.40, not sure) in shipping case. - Cinematography Electronics Crystal Motor Base (could also be used with an Arri 2C) - Arriflex 3C Crystal Handgrip Motor with screws and gear in plastic cup. - 6x 400' Arri 3 mags in 2x 3-hole mag cases - Jurgen's Orientable Video Door for 3C with Sony Color CCD camera. - Wide Angle Eyepiece (no rubber eyecup is included) - Arri grease - Arri Hand Held Door for 3C PICTURED BUT NOT INCLUDED: Extension Eyepiece. NOT INCLUDED: Rubber Eyecup, Power cables for camera motors to battery, power cables for Sony Color CCD, Balance Plate Top, Dovetail, Rods, Batteries, Lenses, etc. If you're not familiar with the 3C, you could think of it as the final refinement of the 2C before the Arri 35-3 came out. It has a more sturdy hinged door, unlike the metal prongs which held on the 2C door to the body. That design was never intended for the weight of a Jurgen's door and I've seen a few 2C bodies that are wearing out where these prongs grip. The 3C came from the factory with a PL mount, and it has a very nice crystal handgrip motor which is often sought after since it works just as well on the 2C. Something else I like about the 3C, they have a variable shutter, something that's hard to find on a 2C. The 3C also has a rosette for mounting accessories, right by the inching knob. The 2C doesn't have that. The 3C movement is the same as the 2C movement and motors, mags and of course ground glasses are interchangeable. The 3C is perhaps best know as the camera Arri made for the film "Das Boot" in the early 1980's. This means this camera isn't nearly as old as most 2Cs floating around out there. I know of four doors made for the 3C, although this package only includes two: Arri Orientable Door (which I've seen can be modified into a video split door) Arri Hand Held Door (included) Arri Straight Door (with optional anamorphic desqueeze module) Jurgen's Video Door (included) I should note, the door type is hinged, but it is not interchangeable with the Arri 3 door. The 3C doors are more rare, as not many of these cameras were made. Also, please see the picture with the note about compatibility with certain lenses due to the PL mount being centered for S35 (as opposed to Academy). Available for only $1,600 O.B.O!!! Available to see if you're in the LA area. For convenience, preference will be given if there is a local buyer who will pick up in person and pay cash. More Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633346930378/ Please send me a private message if interested. Thanks for looking! Rich