Search the Community
Showing results for tags 'krasnogorsk3'.
Found 3 results
Hey everyone, I'm getting ready for a film challenge where our entire short will be made on a single 100 ft reel of Kodak 7219 and shot on a Krasnogorsk-3. In preparation for the shoot I decided to do a lens test with the stock Meteor 5-1 lens on my original Blackmagic Pocket Camera. Surprisingly though, my footage all seemed to be about a stop under exposed. I know that the aperture of a lens doesn't always let in as much light as it should and that T-stops are supposed to correct for this, right? So is this the case here? Have those of you that use the Krasnogorsk-3 encountered this problem? Does this mean that when shooting I should meter for 250 instead 500 to get proper exposure? Any thoughts?
Hi Guys, I own a Krasnogorsk K-3, I purely use it for fun, not professionally. I've put about three rolls through it at this stage, and although I'm happy with the quality of the footage, I notice a large dust build up on all the the footage, as well as some continuous straight scratching on the right side of the film. Have been quoted £400 to have the camera professionally cleaned and serviced, but it's not worth that so I'm not really willing to fork out that much just for a camera that I use for fun. Was wondering if anyone here has experience of cleaning this camera themselves? And if they could give any advice to potentially fixing this at home? I gave the camera a good blow with compressed air, and a little brush the last time I put a roll through it, but still got the recurring issues. Any other help would be massively appreciated! I have attached some images for reference. Best, Jack
Hi, everyone It's my first time posting here :) I've received my first test roll (Kodak 200T) from the lab, shot with my K-3 and the 17mm-69mm Zenit. Loaded carefully in semi-darkness and unloaded in total darkness. Camera was covered with plastic tape when filming (except the meter counter). I found two issues: There are light leaks all over the footage. Not following a constant pattern, some shots are more affected than others but always with the same shape. I've attached two stills of them. I set the speed at 24fps but the footage is in fast motion with the telecine at 24fps. It looks as it was filmed between 12fps or 14fps. I made two shots at 48fps additionally and that ones are running at the correct speed to me. Is it possible that the fps dial is not matching the actual speed? Thank you very much everyone, Marcos