Shawn Sutherland Posted December 9, 2010 Share Posted December 9, 2010 Hi all: I previously used a Blackmagic declink/SDI card to capture from my EX1 XDCAM -using the "uncompressed"/"raw" (HD/SDI Out) BNC connector. The decklink would only capture at 1080i@59.9 Hz uncompressed AVI (v210) format. It wasn't that bad, but I wanted MORE! So, I went out and bought a Matrox MX02 le with MAX because I wanted to capture uncompressed SDI-out 10-bit at 1080p x 24 fps (NTSC). Instead, the only way I could see the output of the Sony EX1 via the SDI-In of the MX02 was by setting the "Project Format" to 720p@59,94 fps. What am I doing wrong here? Has anyone else experienced this problem using a Sony EX1 (SDI-Out to MX02 SDI-In) ? Regards, and thanks ahead for any feedback/help you can offer. Shawn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now