Ferdinand Casido Posted April 13, 2011 Share Posted April 13, 2011 Does anyone know if you can use an Arri 16 SR-1 on a camera slider? I have a location with some tight access where I can't fit a dolly. The slider supports a 3/8" thread size. The Arri uses 3/8" thread size. Arri weighs around 17 pounds including film. I was also thinking of mounting the slider on a tripod. Would this be an issue or should I use two tripods? Thanks Link to comment Share on other sites More sharing options...
Premium Member Will Montgomery Posted April 15, 2011 Premium Member Share Posted April 15, 2011 I've had a Scoopic MS on a slider no problem and I just had an Arri 2c 35mm camera on a ZaZa slider as well. Every slider is different but you shouldn't have a problem on most of them. Link to comment Share on other sites More sharing options...
Ferdinand Casido Posted April 15, 2011 Author Share Posted April 15, 2011 I've had a Scoopic MS on a slider no problem and I just had an Arri 2c 35mm camera on a ZaZa slider as well. Every slider is different but you shouldn't have a problem on most of them. Thanks Will. I'll try this out! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now