Paulo Arellano Posted October 14, 2014 Share Posted October 14, 2014 Anyone know where I can find a battery for a variable speed motor for an arri 2c? Link to comment Share on other sites More sharing options...
Jean-Louis Seguin Posted October 14, 2014 Share Posted October 14, 2014 At http://www.batteryspace.com/ Go to this page: http://www.batteryspace.com/16-8v-nimh-battery-pack-series.aspx Any of the packs with a capacity superior to 4Ah will work. The higher the Ah, the more running time you will get. The 10Ah model is the best. Be sure to get the recommended charger. If you just want to do some quick tests, you can make up a pack out of 3x 6V lantern batteries in series. Very inexpensive. Cheers, Jean-Louis Link to comment Share on other sites More sharing options...
Kenny N Suleimanagich Posted October 14, 2014 Share Posted October 14, 2014 Cinepower is also a great resource. Link to comment Share on other sites More sharing options...
Jean-Louis Seguin Posted October 14, 2014 Share Posted October 14, 2014 Those Cinepower packs must be ten times the cost of a Batteryspace pack. JL Link to comment Share on other sites More sharing options...
Paulo Arellano Posted October 14, 2014 Author Share Posted October 14, 2014 Will this one do the job? http://www.batteryspace.com/nimhbatterypack168v17v5ah84whforreplacementofdivinglightscooter.aspx and another thing, the motors have two pins as connectors. How do i go about connecting these two pins to the battery? Link to comment Share on other sites More sharing options...
Jean-Louis Seguin Posted October 15, 2014 Share Posted October 15, 2014 No power cable? Those are not easy to find. You might have to the motor modified and install a permanent hard wire cable. Otherwise, the 5A battery is fine. Link to comment Share on other sites More sharing options...
Paulo Arellano Posted October 15, 2014 Author Share Posted October 15, 2014 This is all I have for now: Link to comment Share on other sites More sharing options...
Jean-Louis Seguin Posted October 15, 2014 Share Posted October 15, 2014 You have a cable for the variable speed motor. Two sockets, one bigger, one smaller. You just need to put two banana sockets at the output of ypur battery pack. As for the constant speed motor on the camera base, it will certainly have a different tupe of connector. I can't see in the picture. Jean-Louis Link to comment Share on other sites More sharing options...
Paulo Arellano Posted October 15, 2014 Author Share Posted October 15, 2014 The constant speed motor also has two pins. Link to comment Share on other sites More sharing options...
Paulo Arellano Posted October 15, 2014 Author Share Posted October 15, 2014 I looked on their site for banana connectors but couldnt find any. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now