Sebastian Saury Posted November 26, 2014 Share Posted November 26, 2014 Hi guys and girls i have an issue, i have a super16 converted Arri SR2 with video out from the Denz VCSC D2000, my problem is that i don't get any picture out from it, everything seems to work but on my monitor (TvLogic 5,6") it says "no video" i've tried lots of different SDI cables and 2 different tvlogic and same issue. cheers Sebastian Quote Link to comment Share on other sites More sharing options...
Dom Jaeger Posted November 27, 2014 Share Posted November 27, 2014 Hi Sebastian, the SDI input won't work as it's an analog signal, you need to use a BNC to RCA plug adapter and use the green composite input jack (labelled CVBS/Y/S-Y). You also need to change the monitor source setting by holding the Menu button for a few seconds, then scrolling down and selecting "composite". Quote Link to comment Share on other sites More sharing options...
Sebastian Saury Posted November 27, 2014 Author Share Posted November 27, 2014 hi Dom i just want to say i love you and I'm gonna marry you:) it finally worked, super mega thanx, i thought it was something like that but i didn't think about trying with the green one cheers Quote Link to comment Share on other sites More sharing options...
Dom Jaeger Posted November 28, 2014 Share Posted November 28, 2014 i love you and I'm gonna marry you:) I've heard that before, I'm not getting my hopes up until I see the ring. Glad to hear your monitor problem is sorted. B) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.