Michael Hartig

I'm looking for a 2 person SDX900 crew in the Naperville (Chicago) area. My email is contact@inflyte.com. Thanks.

I tried lower settings, but the batt pooped out before the shutdown could be enabled, causing a hard shutdown and bringing the batt to a critical discharge. Dionics just don't like to run that low. My settings are clearly not SDX menu defaults, but simple experimentation has proven them effective for the camera while maintaining battery health. My batts are about a year old - if yours are newer or older you may want to try slightly different settings. mh

The battery menus (battery settings 2) have a section for setting threshhold voltages for warning and shutoff. For my Dionic 90s I set the near end at 13.8V and end at 13.2V. that gives about 7 minutes of warning before shut down. You can tweak it to whatever values give you the warning you require. mh

quote: http://www.bbc.co.uk/rd/pubs/whp/whp034.shtml Warning, the second paper will make your head explode! <{POST_SNAPBACK}> My head didn't quite explode, but certainly stretched a bit. A password to download addendum 10 to this paper would be most helpful. mh

Hee's the one you want. Nicely configured for the SDX900 and the Varicam. I'll have one in the arsenal just as soon as I win the lottery. mh http://catalog2.panasonic.com/webapp/wcs/s...fModel=BT-LH900

Yes. DVCPRO recorded at 25M plays back on our Sony DSR-1800. (That's playback only - not record)

While DVCPRO50 will only play back on a DVCPRO50 deck, DVCPRO25 plays back just fine on Sony DVCAM decks.

CHarles - I'm doing an SDX-900 shoot in your area next week - give me a call. Michael - 402-345-2164

Tape is cheap, the number of available clients is finite, and image is all. Why consider even a second pass? mh

I'm producing a show on SDX in the midwest and can't afford to send my crew to New York for some necessary footage. Anyone in NYC with an SDX900 interested in a small job? 1 to 1.5 days, 2 person crew w/audio and small light kit. Shoot mid September. Contact me off line. thanks, mh

John - For tape labels, try this link: http://www.professionallabel.com/productCat5312.ctlg As for case labels, I made my own template in Microsoft Publisher and print them off on yellow paper (keeps that DVCPRO look, ya know.) If you'd like the template, give me your email and I'll send it along. mph