David Wright

I have been testing a new lens adapter that allows me to use a Mamiya 645 lens on a B4 mount. It works great with lenses up to 200mm but the image is soft with my 300mm & 500mm. Both seem to work fine on a Mamiya stills camera. I am wondering if anyone has an idea of what might be going on? It is not a focus issue so much as a general softness across the whole picture. Thanks David Wright www.lunaseafilms.com

Abelcine made me a cable and it works great. The switch is from an Aaton. Takes me back to the old days. Call them in NY if you need something similar

There is no back focus adjustment, otherwise I would have tried that.

I just bought a lens adapter that should enable me to use Mamiya 645 stills lenses on a B4 mount. I shoot wildlife films and often need long telephotos, so this would be very useful. I have tried a 100mm,200mm,300mm & 500mm lens each with a progressively worse problem. None will allow me to reach a far infinity focus (a distance of approximatlry 1/2 mile or more). I am guessing the mount is just a fraction too deep. I am using a Panasonic HDX900 camera. Does anyone have any suggestions othetr than returning the adapter? Thanks David www.lunaseafilms.com

Thanks Phil, I am a cameraman and don't do any editing, so was hoping that I could find a way other than FCP to log footage to send off to a library I work with. It would be good if there was a cheap alternative to just go firewire out of the camera and into the computer, sort and then output files. Looks like FCP is it. I have an old copy (4.5) but I don't think it has the correct codecs to talk with the HDX900. David

I shoot with an HDX900 and need to find the most economic way to capture footage and allow me to select clips to pass onto a library. I need to send them uncompressed QT movies on a drive, starting out the process with DVCPRO HD tapes. Is my only way to get FCP or is there a more economical way? Thanks David www.lunaseafilms.com

Thanks Mitch, I emailed the same request to Jonathan Epner last week so will be in contact to order the cable. David www.lunaseafilms.com

I use some prime lenses with my HDX900 and this means I can not use the remote on/off & zoom control that plugs into a zoom lens. I am wondering of it is possible make a cable that would plug into the camera where the zoom normally connects and trigger the camera via a switch that I would place on the tripod handle. I just need to trigger the camera to record. Thanks David www.lunaseafilms.com

Thanks, I read about the new P2 recorder and will wait for it to hit the market. David www.lunaseafilm.com

Thanks, I just bought a Mamiya / B4 adapter so would like to have just one lens kit for both camera systems. I shoot wildlife material so most interested in macro and telephoto lenses. David www.lunaseafilms.com

I am looking for a way to use a Mamiya 645 lens on a RED an wondered if any one had any suggestions. Thanks David www.lunaseafilms.com

I have a Panasonic HDX900 and want to start recording to solid state in addition to tape. I am wondering which recorder would be the best option? Should I mount a Panasonic AG-HPG10 (P2) recorder on the camera or the Convergent Design XDR or perhaps the nanoflash? Also wondering if the Convergent Design products give me any increase in quality over the tape? The reason I want to do this is that I shoot for a stock footage library that wants me to deliver in a file based workflow not on tape. Meanwhile I still have clients wanting a tape after a shoot, so have to find a way to provide both. I would also like to avoid spending too much on a post system to duplicate material as I spend most of my time out shooting, not in a edit room. Any advise would be much appreciated. Thanks David www.lunaseafilms.com

I am trying to find a set of short tripod legs to use with a larger O'Connor head (super claw). Let me know if you have any you would be willing to sell. Thanks David HDCamera@mac.com

Hi Vincent, I have a Miller DS30 with two stage legs and case that I am looking to sell. Email if you would like more details ( hdcamera@mac.com ) Best David

I am looking for an adapter to mount a Nikon lens on a B4 mount. Century used to make a 1.4x adapter but it seems to have gone off the market. Does anyone have one they are no longer using? Thanks David email me at hdcamera@mac.com

Sorry, should have mentioned I am in the US. Stock is all sold. Thanks

I am swapping from film to HD camera and still have some 16mm film stock going spare. Was to be used on a super 16 project. Kodak Vision 2 250D x 14 rolls 400'- $400 plus shipping Kodak Vision 2 50D x 7 rolls 400'- $200 plus shipping Bought for a project about 12 months ago and kept refridgerated. The film has been carefully stored but is bought with no guarantee. If interested, email me lunaseafilms@mac.com

Moving item to eBay. Thanks

Marshall V-LCD4PROL 4" Camera Mountable LCD Monitor in as new condition with case. Asking $150 OBO. Please email me at lunaseafilms@mac.com for details. Lists at $270 at B&H (http://www.bhphotovideo.com/c/product/283159-REG/Marshall_V_LCD4_PRO_L_V_LCD4PROL_4_Camera_Mountable.html)

Miller DS 30 fluid head, tall legs, spreader and case Asking $2,000 plus shipping (Manufacturer's photo attached). All is great condition with light signs of wear. Takes cameras up to 30lbs. If interested please email me at lunaseafilms@mac.com for more information or photos. See Miller site for specifications http://www.miller.com.au/products.cfm?sect...;productID=105#

Hi Craig, If the tripod is still available, I may be interested. Could you email me some details / photos lunaseafilms@mac.com Thanks David