John Woosley

Hey everyone, I'm going to be shooting some drone footage in a few weeks of a backyard, and the idea is that there would be a layer of fog on the ground to make the setting seem like some kind of alien landing. I'm going to be shooting this in the summer in the US, so pretty warm temp wise, so if I did have a fogger and put it through a chiller would it even lay down in such a hot environment? Whats the best way to achieve this?

So about to do some tests with this camera. The ASA dial has a red dot and a white dot, I assume one is outdoor and one is indoor? The manual talks about setting the opposite ASA if you wanted to use a tungsten film outdoors, what would that be? In terms of the internal filter, if I put the key in the base, that disables it correct? Just trying to see if I was going to do an tungsten test what settings I need to have to be most successful. Thanks!

So funny you mentioned that I just found the Schneider you're talking about listed on ebay!

Bueller?

Looking for a fast modern lense to use with this camera, can you guys look at this and let me know if it would fit the bill? http://www.ebay.com/itm/162184224289?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT   It's a Fujinon TV zoom lense, F 1.2,  12.5-75mm.   Thanks!

Just got one of these, the included charger has a switch with a 110 and 220 side- does it matter which I use? Can't seem to find any literature that explains the difference. I'm assuming voltage?

So somehow managed to break probably one of the most trivial pieces. The spindle of this Chinon dual whisper has a little metal arm you swing down to hold the reel in place. See the picture below. Anyone have ideas on how to fix? Thanks. https://drive.google.com/file/d/0ByAzEuKKlaradGQ0TnR2cGdLQzA/view?usp=sharing

Good point I didn't think about the pistol grip. I have a canon 814 which allows it to be folded out of the way which would work, but others I have do have a pistol grip.

David's book "Lighting for cinematography" is excellent!

Anyone tried this with a super 8 camera? These units are built for dslr but not sure why they wouldn't work: https://www.ebay.com/itm/252423427444

Here are both sides of the camera. Not sure if it matters but no film in. https://drive.google.com/open?id=0ByAzEuKKlarabV91R0t3ZE5qZ1E https://drive.google.com/open?id=0ByAzEuKKlaradjgtcm54Y0RyMFU

I got a great deal on an S800, and was able to get the battery to work. When I test the shutter without film, it seems like it only advances one frame. Do I have one of the CR levers set wrong or is that normal if no film is in? Battery meter, zoom etc all seem to work. Second question- probably obvious but can you switch a cart in the middle of it? Might try to evaluate some different cameras and not sure the effect of removing a cart before its finished and inserting in another camera. Thanks.

Great thanks.

Quick question...I have purchased some 50D negative stock from Pro8mm. Is this safe to scan through an airport x-ray? Most film is now a days, but wanted to confirm before I make the decision. Thanks for your help!

I I think I did...but I'll have to check again when I'm back to the camera. Is there a way to improve the connection between the contacts and camera? Some conducting material perhaps?