Jan Bujnowski

Hello everyone, I have quite a strange problem with my Aaton XTRPlus. It's working normally until I angle it down. Then it starts to make a loud sound and stops working. I am guessing that this is because the claw slips and stops moving the film forward, but I'm not really sure. Another detail is that this problem only appears when there is more than 60 meters of film already shot. If anyone here has had this problem before, maybe you know what the cause of it is and how to solve it.

Hello, yes, Vario Switar 16-100mm fully covers super16

Final price - 900 Euro

Price reduced - 1000 Euro for Zeiss 9,5mm

Bump Zeiss 9,5mm still available for 1100 Euro

16mm lens sold, 9,5mm still available

Yes, diameter of the glass part is around 42mm

Hello, yes, I’m based in Poland. Front diameter in 16mm lens is 62mm

Price reduced - 1100 Euro for each lens

Price reduced - 1200 Euro for each lens

Selling my two Zeiss Super Speeds MkI. I had a plan to build a full set, but I have to give up on it. Lenses are in perfect optical condition, glass is clean, there are no scratches or cleaning marks. I bought them in summer 2020 and they were barely used. 16mm lens has follow focus gear from RafCamera, 9,5mm lens has this gear 3D-printed. Both lenses are equipped with Arri Bayonet to PL adapter. Here are some pictures of the lenses on my google drive: https://drive.google.com/drive/folders/1X8O_BNI3xTkgDP8NLTmIIdw7N4dx_2GC?usp=sharing Price for each lens is 1300 Euro. If you buy both lenses, I'll throw in plastic case and additional Arri Bayonet to PL adapter.

Hello, I'm looking to buy Super16 Zeiss Distagon 25mm T/1.3 MkI. Preferably in PL mount, but Arri-b is also acceptable. Thank you, Jan

Unfortunately all lenses are already sold

Thank you for your help and for the scan. Fortunately I can read Cyrillic, so the manual will be really helpful to me.

Thank you for your answer! Do you know by any chance how to attach that diaphragm ring to the lens?

Hello, I've got an old, Russian 8mm camera manufactured by Lada, with Lomo 9-37 lens and I don't know how to change the aperture manually. There is no aperture ring, but in the package I found something like this: I thought it should be attached to the back of the lens, but it seems difficult to remove the lens from the camera body, because it's connected with some parts inside the body (I marked it in red on the photo). Is unscrewing that whole part really the only way to attach diaphragm ring to the lens or is there any easier way to do it? Another question: does anyone know what that K-A-P switch is used for? Thanks!

Hello, I'm looking to buy one of Canon's S16 zoom lenses at a reasonable price. Preferably 11-165mm or 11.5-138mm. Any help will be appreciated

SOLD

Yes, it is still available, as well as Angenieux 12-240mm.

I've sent you an e-mail

Hello, I'm looking to buy an Aaton XTR or newer model. Preferably in Europe. Thank you in advance for any help!

Update & price drop: 1. Bolex EBM Super16 & accessories (1500 euro): - 400ft mag and MM motor - Battery charger - Power grip + power grip battery - Remote control cable - Battery container - 4 filter frames - Set of Kodak wratten gelatine filters and ND gelatine filters - 4x 200ft spools - 2x100ft spools - Metal case Lenses: 1. Switar 16mm f/1.8 - (150 euro) 2. Switar 25mm f/1.4 - (150 euro) 3. Angenieux 12-240mm f/3.5 Cameflex mount - (600 euro) All other things are now sold.

Reduced prices: Cameras: 1. Bolex EBM Super16 & accessories - 1700 euro 2. Bolex SB Regular16 & accessories - 650 euro Lenses: 3. Switar 10mm f/1.6 - 150 euro 4. Switar 16mm f/1.8 - 200 euro 5. Switar 25mm f/1.4 - 200 euro 6. Angenieux 12-120mm f/2.2 Cameflex mount - 300 euro 7. Angenieux 12-120mm f/2.2 Bolex bayonet mount (needs collimating) - 200 euro 8. Angenieux 12-240mm f/3.5 Cameflex mount - 800 euro Here are also some pictures: https://drive.google.com/open?id=1VL-QmXmM2lQsW80iO_fssHCZOCvDOuxe (Vario-Switar 16-100, one of the 400ft mags, ESM motor and Krasnogorsk set are already sold)

Hi, I was looking on the internet for some videos made using Cinema Products Ultra-T lenses with 16mm cameras and I couldn't find too many of them. I wonder if some of you used them and have any footage on vimeo or YouTube. Thank you!

Hello, I have 3 packages of 16mm cameras to sell. They are supposed to be sold as a sets, but I will also consider offers if someone would like to buy a lens or camera separately. Cameras are located in Warsaw, Poland. SET NR 1: 1. Camera: - Bolex EBM Super16 2. Lenses: (all those lenses were serviced, lubricated and collimated. All covers Super16 format) - Kern Vario Switar POE 16-100mm F/1.9 - Switar 10mm f/1.6 - Switar 16mm f/1.8 - Switar 25mm f/1.4 3. Accessories: - 2x 400ft mags and 1x MM motor for 400ft mag - Battery charger - Power grip + power grip battery (I don't think it needs re-celling, never had a problem with it) - Remote control cable - Battery container - 7 filter frames with filters (ND 0,6, ND 0,9, ND 1,2, 85/ND 0,9, 85B/ND 0,3, 85, 85B) - Set of Kodak wratten gelatine filters and ND gelatine filters - Bolex bayonet to C-mount adapter - Bolex bayonet to Nikon adapter - 4x 200ft spools - 2x100ft spools - Metal case Here are a few shots made with that camera throughout the last three months: Asking price: 4500 euro SET NR 2: 1. Camera: - Bolex SB Regular16 2. Lenses: - Angenieux 12-120mm f/2.2 Cameflex mount - Angenieux 12-120mm f/2.2 Bolex bayonet mount (this one has glasses in perfect condition, but it needs some collimating. I can arrange it in Poland, before shipping) - Angenieux 12-240mm f/3.5 Cameflex mount 3. Accessories: - Bolex MST motor and battery pack - Pistol grip - Bolex RX-Fader - Bolex bayonet to cameflex mount adapter - 2x100ft spools - Metal case Asking price: 2500 euro SET NR 3: 1. Camera: - Krasnogorsk-3 2. Lens: - METEOR-5-1 17-69mm f/1.9 3. Accessories: - Filters - Lightmeter - Pistol grip - Bag Here a few shots made with that Krasnogorsk and 30 years old ORWO stock (I was surprised that anything came out of it): If you will have any questions or you would like me to send you photos of the cameras, please contact me by email: janbujnowski1@gmail.com Thanks!