Search the Community
Showing results for tags '16s'.
-
Hello everybody! I recently purchased a quartz controlled motor for my Arriflex 16 St, however unfortunately it's not working. Apparently this is a super rare motor made by ARRI (Quarz - Antriebs - System, Typ: A 16 St E), and there is little to no information about it on the internet. I wonder if anybody reading this forum has any documentation about this motor, preferably schematics. I managed to find somebody who's willing to fix it, but it would make our life a 100x easier if we had a starting point. Thank you. (1st picture is from a video on youtube by youtuber "Fresh Ground Pictures", 2nd is my motor)
-
This blimp is in really nice condition for it's age. I think it'd be a classy display piece - especially if you pick up a wooden tripod for it. This is for a LOCAL SALE ONLY in Los Angeles. I won't/can't ship this heavy blimp, unfortunately. I do not have a case for this blimp, so someone will need to pick up and pay cash (or Zelle) in person. I usually live in NYC but plan to visit LA at the end of April. If timing doesn't work for a sale while I'm visiting LA, a family member can assist with the transaction. I never actually used this blimp, but in the early 2010s I did have an electrician friend who worked at Clairmont Camera change out the cracked old plastic power cable connector on it. It used to have a very old (and unrecognizable to me) power connector, and my friend changed it to a 12V 4-pin Cannon (XLR). So that's the connector that can now power the blimp (to power camera inside and light inside the blimp). I can make no guarantees about the functionality of this blimp and how much it could quiet down a 16S since it's been a while since I did a test run of a camera in it. From my memory, I think one plate was for the an Arri 16S camera, and the other type of plate was for the Arri 16M camera, but I don't remember if I actually ever tested both my 16S and 16M cameras in this blimp when I owned them, so I really can't make any promises there either. If I had the space for this at my NYC apartment (I really don't, unfortunately), I'd keep this and put it on display. As you can see in the pictures, there are some small spots of light rust. You can also see the fabric accordion style matte box bellows have gotten a little rough over the years. This was stored in a climate controlled house (not a garage), but there are a few signs of it's age. Pictures: https://www.flickr.com/gp/95212445@N02/9Kfx5563yb 3 short video clips: https://vimeo.com/931613961/34f5b7268e https://vimeo.com/931613968/723d9724db https://vimeo.com/931613980/4ae8cba03c $600 O.B.O.
-
For sale here is one of Tobin's last (newest) crystal motors ever made for the Arri 16S or 16M. Runs forwards only. Crystal speeds: 12, 20, 24, 25, 30, 40, 50 fps. This was bought new directly from Tobin and has only been run to test a few of times. More information from the Tobin website (a pdf download link) http://www.tobincinemasystems.com/TCS_Public_PDF/TXM22A.pdf Please see my other listings, I'm moving and selling a bunch of gear. Available for $600 O.B.O! Available for pick up in West Hollywood through this Saturday. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633331298455/ Send me a PM if interested. Thanks for looking! Rich
-
$150 Very convenient item to have if you own an Arri 2C or 3C or 16S or 16M or 16BL or 16SR. The rubber eyecup (in v. good condition) has a spring so when you take your eye away from it, two doors inside the eyepiece close, blocking light and preventing you from accidentally flashing your film while rolling. Diopter adjusts and locks normally. Cosmetics are ok for the age. Glass is pretty clean - a couple of schmutz marks on the inside of the "rear" element as you can see in one of the pictures. Not visible when looking at an image. Located in Brooklyn, NY. Thanks for looking.
-
For sale TOBIN TCS TXM-22A Crystal Sync Motor for Arriflex 16s and 16-M Cameras Bought from Du-All Cameras 3 years ago. Used a couple of times and tested recently. Works flawlessly. Item is in great Condition, with only minimum scratches here and there, barely seen. Serial number 9440 Paid US$ 995.00 (see price label on picture). It's on eBay at US$ 800, but open to Make Offer: http://www.ebay.co.uk/itm/TOBIN-TXM-22A-CRYSTAL-MOTOR-FOR-ARRI16S-and-ARRI-16-M-CAMERAS-/172541639598? Feel free to contact me with any questions.
-
I'm selling my 16mm Arriflex 16M camera with 3x 400' mags and variable speed motor. Camera was purchased from forum member Tim Carroll maybe 2-3 years ago if I remember right. I had it checked out by a technician and shot a registration test after I got it and it checked out fine. I like the 16M for it's hinged door, simple threading and gear-driven mags (as opposed to the 400' mags for the 16S which have their own separate torque motor). Please see, I'm also selling a beautiful fiberglass blimp that will fit this camera, and crystal-sync motors. I don't have a case for the camera but there is a case for the mags. More pictures on flickr: http://www.flickr.com/photos/95212445@N02/sets/72157633331322365/ $400 O.B.O. __________________________________________________ Consider this a listing for a great Tobin Crystal TXM-22 motor. It comes with a camera, but just think of that as a bonus since the camera may not be worth a whole bunch. I've never shot with it, or with the included mags. I bought it off Craigslist from a DP/Operator on the other side of the country about a year or two ago and one technician who looked at it told me some of the design choices in converting this camera to S16 looked risky and shooting with it may not be worth the risk. I've heard this is one of two or three 16S cameras converted to S16/PL mount by Van Diemen in the UK. It seemed to run fine and the previous owner promised he shot lots of footage on it with no problems so maybe I'm just being paranoid. But! It came with this awesome motor. I actually like it better than the final refinement, the TXM-22A, since the "A" model can't run in reverse. Also included are two of the rare 200' mags for the 16S, although as I mentioned, I never tested them, so this is all "AS IS". There are also two 400' 16S mags. Each mag has it's own torque motor, and I was told by the person I bought these from that they've all been upgraded to be 12V compatible. There is no case for the mags. The camera body case is a bit old looking but still latches closed firmly. The foam is a bit of a mess. No power cables or batteries or lenses are included. More pictures on flickr: http://www.flickr.com/photos/95212445@N02/sets/72157633331237723/ Selling for only $600!!! __________________________________________________ For sale here is a TXM-22A, one of Tobin's last (newest) crystal motors ever made for the Arri 16S or 16M. Runs forwards only. Crystal speeds: 12, 20, 24, 25, 30, 40, 50 fps. This was bought new directly from Tobin and has only been run to test a few of times. More information from the Tobin website (a pdf download link) http://www.tobincinemasystems.com/TCS_Public_PDF/TXM22A.pdf More pictures on flickr: http://www.flickr.com/photos/95212445@N02/sets/72157633331298455/ Available for $400 O.B.O! __________________________________________________ I'm also selling one of Tobin's last (newest) Variable Speed motors ever made for the Arri 16S or 16M. Runs forwards or reverse, 0-50 fps. This was bought new directly from Tobin and has only been run to test a couple of times. More information from the Tobin website (a pdf download link) http://www.tobincinemasystems.com/TCS_Public_PDF/TM23.pdf More pictures on flickr: http://www.flickr.com/photos/95212445@N02/sets/72157633346734096/ Available for only $200!!! _________________________________________________ All of the above is available to see in Montebello, California through Tuesday 12/3. If that's too soon, I can coordinate another time for a relative of mine to show it to you since I'll be heading back out of town. For convenience, preference will be given if there is a buyer in the Los Angeles area who will pick up in person and pay cash. Please send me a private message if interested in any of the above. Thanks for looking! Rich
-
I'm selling my very rare Arriflex 16 Fiberglass Blimp. This is for use with either a 16S or a 16M and and mounting plates for both are included. This was purchased a few years ago from forum member Tim Carroll who also ran the great website www.arri16s.com. Tim did a beautiful job of restoring this gorgeous piece of film history. The lens pictured is not included. The 16M camera and mags are not included, although they are for sale separately (see separate listing). They are in these photos only to demonstrate how a camera would fit inside the blimp. I also am separately selling a Tobin TXM-22A motor that would go very well with this blimp. The blimp's shutter advance knob seems just a few mm too short to reach the Tobin's knob, so you may want into fashioning an extension on the rubber knob that reaches toward the motor on the inside of the blimp. One of the two latches is broken on the wooden shipping case but everything made it to me ok with that broken and it's always held shut firmly enough with just the one latch. Also, the power cable that connects a 12V battery (4-pin Cannon) to the outside of the blimp will need to be rewired if you intend to use the blimp for anything besides decoration. This cable provides power for the camera inside to run, as well as power for the interior lightbulbs so you can push buttons and see things inside like the fps tachometer. The cable was just old and brittle and started melting in one spot (a couple of photos are included). The connectors both look fine, so I would guess a technician could make you a replacement cable or two. I just haven't had time to get that done. The seals on the two doors (the top magazine door and the side camera body door) don't seem quite as tight as they were a few years ago so that may be one other thing to have checked if you intend to use it for the purpose it was designed. When I first got this from Tim, it did an amazing job of silencing a very noisy 16S, but I have not tested it recently. The thought that went into the intricate design of this blimp is really impressive. It is in excellent condition. I would love to keep this as decoration for my apartment but I moved to NYC a few months ago and there just isn't space. $800 O.B.O. Please send me a PM if interested. I'm free to show it in Montebello, CA through Tuesday 12/3. If that's too soon, I can coordinate another time for for a relative of mine to show it to you since I'll be heading back to New York. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. More pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633332383091/ Thanks for looking! Rich
-
Hi all. Selling my 2 Arri 16s + Mags. Just checking who would be interested while I arrange a good price for it. Thanks, Flavio
-
Hello! I have been trying to outfit my Arriflex 16MB with a sync motor for music videos or similar (knowing how loud my camera is). I purchased a 60hz - 42v sync motor without its transformer for a reasonably low price on ebay. I shouldn't have any trouble building my own transformer but the connector on the motor is a little confusing to me. Does anybody know what the pins are on these 60hz - 42v motors? I assume there is a ground, pilot tone, +/- 42v, maybe a secondary at 8vdc for the torque motor on the SB model? Any help would be appreciated!!
-
Hello all. Please check my 2 Arris for sale on ebay: http://www.ebay.co.uk/itm/2-ARRIFLEX-16S-KITS-FULLY-OVERHAULED-AND-WORKING-/171623295637? 2 ARRIFLEX 16S BODIES 4 MAGAZINES (1 12V + 3 8V) 2 ORIGINAL ARRIFLEX MATTEBOX ORIGINAL 8V MOTOR TOBIN TCS TM-23 For sale 2 Arriflex 16s kits Fully working with magazines and motors. Lens not included. Fully serviced by Les Bosher in South Wales about 1 year ago. Bodies are pristine and clean inside and outside. 1 Original Mattebox is in good condition (pictured). 1 Original Matte Box with bad signs of usage (not pictured). Magazines have some signs of use and acrylic pieces (on footage meter) cracked, but does not affect performance. Serial Numbers: 6587 and 8467 Questions answered promptly. Not selling separate, not splitting pieces, sorry. Please make your offering considering they are fully working and bodies are pristine, and servicing alone was £300. Can ship worldwide but buyer pays expenses and is responsible for tax and duties on countries of destination. No returns. Good luck.
-
Hello everybody. It comes to a time where you sell or die. So I'm selling. All my 16mm Film equipment. I'm listing in here first before going to eBay, as you guys might be interested in something and I can spare some of my time and a but of money that would go to to ePay. All I can guarantee is pristine/excellent. PM me and I can check and send you the best price I can do so I might sell some of it quick and painless. Here we go (separated by groups I intend to sell, not happy to split unless you make an offer I couldn't refuse: 1 Arriflex 16s Body in pristine Condition (being serviced by Les Bosher in UK). 2 Arri 16 S magazines (1x12VMotor and 1X 8V motors) 1 Tobin Rev Motor TXM 23 1 Arriflex 16s Body in pristine Condition (being serviced by Les Bosher in UK). 2 Arri 16 S magazines (2X 8V motors) 1 Tobin Rev Motor TXM 23 1 Bolex EL 16mm (late model, with Original Battery re-celled by Chambless Equipment USA) 2X Bolex Magazines 1 Take-up Motor 1 Kern Vario Switar 10-110 POE 1 Bayo-C Mount Adapter 1 Original (beated) Box. Some filters and other extras (Cables, etc) 1 Bolex Rex 5 ULTRA 16mm (by Bernie o'Doherty) 10, 16, 25 (collimated by Bernie too) & 50mm Lenses (recently acquired), all RX lens in pristine condition, no nasties of any kind, perfect images. Barely seen marks in the barrel in some (these will be the hardest pieces of my selling kit). 1 Original Bolex handle. + small extras, filter, etc. That's it. Let me know if any real takers around, just PM me. I can ship worldwide (from UK). A reminder that I'd make my best for a fair price. just please bear in mind they're all in great shape, even for collectors. And alsoI'm servicing the Arriflex with Les Bosher to be sure they will be sold working and in great shape. Thanks, Flavio
-
Ok, here's the deal. Consider this a listing for a great Tobin Crystal TXM-22 motor. It comes with a camera, but just think of that as a bonus since the camera may not be worth a whole bunch. I've never shot with it, or with the included mags. I bought it off Craigslist from a DP/Operator on the other side of the country about a year or two ago and one technician who looked at it told me some of the design choices in converting this camera to S16 looked risky and shooting with it may not be worth the risk. I've heard this is one of two or three 16S cameras converted to S16/PL mount by Van Diemen in the UK. It seemed to run fine and the previous owner promised he shot lots of footage on it with no problems so maybe I'm just being paranoid. But! It came with this awesome motor. I actually like it better than the final refinement, the TXM-22A, since the "A" model can't run in reverse. Also included are two of the rare 200' mags for the 16S, although as I mentioned, I never tested them, so this is all "AS IS". There are also two 400' 16S mags. Each mag has it's own torque motor, and I was told by the person I bought these from that they've all been upgraded to be 12V compatible. The camera has been upgraded with a 4-pin Cannon (aka XLR) power connector instead of the old Arri 2-pin "banana plug". It's also been fitted with a 80fps max tachometer (I believe taken from an Arri 2C H.S.) There is no case for the four mags. The camera body case is a bit old looking but still latches closed firmly. The foam is a bit of a mess. No power cables or batteries or lenses are included. Selling for only $800!!! Available to see in West Hollywood through this Saturday. After that, get in touch and I can coordinate a time when you can check it out. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633331237723/ Please send me a private message if interested. Thanks for looking! Rich
-
HI All. Selling my Arri 16s. Just serviced by Les Bosher in UK. Arri 16s Body + 2 Magazines (1 12v by Tobin and 1 8V) + 1 Tobin TXM22a Motor + Original Arri 8V Motor + Original Matte Box. Kindly accepting offers before going for ePay. Pictures sent on request (attached only one as is allowed 100kb). Thanks, F
-
Hi all. I have an Arri 16mm Set for sale. Beautiful condition: 1 Arri S Body + 2 Magazines (1 8v + 1 12V) + Tobin TXM 23 Motor + Original Arri 8V Motor + Original Matte Box I'm accepting offers before putting on eBay. Let me know how much would you offer. Pictures sent on request. The body has just been serviced by Les Bosher in UK. It's fully working and proper lubbed. Thanks, F
-
I'm selling my very rare Arriflex 16 Fiberglass Blimp. This is for use with either a 16S or a 16M and and mounting plates for both are included. This was purchased a few years ago from forum member Tim Carroll who also ran the great website www.arri16s.com. Tim did a beautiful job of restoring this gorgeous piece of filmmaking history. The lens pictured is not included. The 16M camera and mag is not included, although they are for sale separately (see separate listing). They are in these photos only to demonstrate how a camera would fit inside the blimp. I also am separately selling a Tobin TXM-22A motor that would go very well with this blimp. The blimp's shutter advance knob seems just a few mm too short to reach the Tobin's knob, so you may want to fashion an extension on the rubber knob that reaches toward the motor on the inside of the blimp. One of the two latches is broken on the wooden shipping case but everything made it to me ok with that broken and it's always held shut firmly enough with just the one latch. Also, the power cable that connects a 12V battery (4-pin Cannon) to the outside of the blimp will need to be rewired if you intend to use the blimp for anything besides decoration. This cable provides power for the camera inside to run, as well as power for the interior lightbulbs so you can push buttons and see things inside like the fps tachometer. The cable was just old and brittle and started melting in one spot (a couple of photos are included). The connectors both look fine, so I would guess a technician could make you a replacement cable or two. I just haven't had time to get that done. The seals on the two doors (the top magazine door and the side camera body door) don't seem quite as tight as they were a few years ago so that may be one other thing to have checked if you intend to use it for the purpose it was designed. When I first got this from Tim, it did an amazing job of silencing a very noisy 16S, but I have not tested it recently. The thought that went into the intricate design of this blimp is really impressive. It is in excellent condition. I would love to keep this as decoration for my apartment but I'm moving and I know I just won't have space, so I'm selling it. $800 O.B.O. Please send me a PM if interested. It's available to see in West Hollywood through Saturday. If that's too soon, I can coordinate another time for you to check it out. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633332383091/ Thanks for looking! Rich
-
For sale here is one of Tobin's last (newest) Variable Speed motors ever made for the Arri 16S or 16M. Runs forwards or reverse, 0-50 fps. This was bought new directly from Tobin and has only been run to test a couple of times. More information from the Tobin website (a pdf download link) http://www.tobincinemasystems.com/TCS_Public_PDF/TM23.pdf Please see my other listings, I'm moving and selling a bunch of gear. Available for only $260! Available for pick up in West Hollywood through this Saturday. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633346734096/ Please send me a private message if interested. Thanks for looking! Rich