Gareth Blackstock Posted August 12, 2019 Share Posted August 12, 2019 Hello, I am coming up to a decent sized project and I need to test my store of expired stock. I am intending on taking a few feet from each roll, exposing them in a uniform way, sealing them, and send them off to be processed. My big question is: how do I expose them all uniformly? Do I sit the lengths on a table in a dark room and let off a camera flash? Would that over expose the high ASA stock? The lab I use is a small one and I think they do not have facilities or space to do such a test. Normally I shoot 100 feet as a test and send it off to discern the condition of the stock I have remaining, but I have around 13 different film stocks and I suspect a few of them. I also accept there will be quality of image issues, but as the project is not a big budget one, we are happy to work with what we have. Any thoughts would be helpful... Cheers, gareth Link to comment Share on other sites More sharing options...
Premium Member Charles MacDonald Posted August 12, 2019 Premium Member Share Posted August 12, 2019 some labs will just do a test by taking a couple of feet from each roll and developing it. slap it on the densitometer and see what the fog levels look like. That of course will not show how much speed loss you have. BUT the labs often will do this for a good customer at a low rate. (if you are lucky even free) if you have a camera available you might be able to shoot a slate with grey card and grey scale, at box speed. include a number to identify each batch you are wanting to check and leave some unexposed film so they can do a densitometer check for fog as above. if you can load in the dark and cut off your samples in the dark, you might still be able to only use a few feet. talk to them about how they want you to pack the samples as they would probably prefer to splice them by their own methods. your lab may have other ideas of course, you don't want to end up paying for a minimum processing chage for each sample. Link to comment Share on other sites More sharing options...
Gareth Blackstock Posted August 13, 2019 Author Share Posted August 13, 2019 Gday, Thanks for the info, after chatting to the lab I reckon the best course of action is to expose each 5 foot length in camera, focused on a sample card, like your suggestion, in average light, ie 5.6 irrespective of ASA, or light the sample to get the same exposure, then load the lengths into light proof box and send it in processing. Its going to be quite process but I will get definite answers on my film stock. Thanks again, Gareth Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now