WTB Arriflex 16BL Accessories

Tyler Fukuda · February 16

Hey folks!

looking to purchase a few items.

1) Magazine Blimp / Barney: These are leather and come in either black or white with ‘arriflex’ stamped on the side.

2) Magazine port (body side) lid.

3) Magazine loop protector shield

4) Power cable to 4-pin XLR

5) Spare BLE motor

6) Power switch box: I believe you can attach these to a panhandle. Could probably fabricate one myself also.

LMK if you have any of these items!

Thank you!!

Steve Switaj · February 16

For anybody chasing number 4, the power cable, the standard BL connector is an Amphenol 165 series, and they are still available from Mouser electronics. Granted the price is ouchy, but at least it gives you an exact part number to search the interwebs.

I could be wrong, but I seem to recall it's a 12 pin. What I don't recall is which side is male and which is female.

If it is indeed a 12 pin, it's one of these

https://www.mouser.com/c/connectors/mil-spec-mil-type/circular-mil-spec-connectors/circular-mil-spec-connector/?m=Amphenol&number of positions=12 Position&series=165

Tyler Fukuda · February 16

17 minutes ago, Steve Switaj said:

For anybody chasing number 4, the power cable, the standard BL connector is an Amphenol 165 series, and they are still available from Mouser electronics. Granted the price is ouchy, but at least it gives you an exact part number to search the interwebs.

I could be wrong, but I seem to recall it's a 12 pin. What I don't recall is which side is male and which is female.

If it is indeed a 12 pin, it's one of these

https://www.mouser.com/c/connectors/mil-spec-mil-type/circular-mil-spec-connectors/circular-mil-spec-connector/?m=Amphenol&number of positions=12 Position&series=165

I believe it’s Amphenol 165-13

9-pin for the 16BL. I just don’t see any data sheets that tell you which wires need to be soldered where for 4-pin xlr