dd3stp233 Posted January 20, 2006 Share Posted January 20, 2006 I have a 16mm workprint with seperate 16mm magnetic soundtrack that I need transfered via Rank Cintel (or similar) to Digibeta (or similar) in the Los Angeles area but have not been able to find a place to do this. It would be much appreciated if anyone can tell a place, preferably the least expensive, that can do this. Thanks in advance. Link to comment Share on other sites More sharing options...
Sam Wells Posted January 20, 2006 Share Posted January 20, 2006 FotoKem could certainly handle that. Whether they could run the telecine & mag machine in interlock, that's not too common these days. Punched hole and a bleep, you'll be fine. Note you'll have to pull down the sound speed somewhere, but no big deal. -Sam Link to comment Share on other sites More sharing options...
Robert Hughes Posted January 20, 2006 Share Posted January 20, 2006 (edited) Cinesound in Minneapolis provides interlock with their Marconi line CCD telecine to Digibeta. They are price competitive and always give me good service. Ask for Dennis O'Rourke: www.cinesound.net Question: you are wanting to transfer workprint? If you've just cut your project on a flatbed it's going to be all marked and scratched up. But if it's not cut yet, why not transfer camera original negative? You requested a Rank Cintel transfer; how important is that telecine brand? Or are you merely referring to the general 80's era telecine standard? Edited January 20, 2006 by Robert Hughes Link to comment Share on other sites More sharing options...
dd3stp233 Posted January 21, 2006 Author Share Posted January 21, 2006 What mean by I need a Rank Cintel (or similar modern equivilent) is that the workprint has many splices in it and would likely not run through a projector type telecine. I say workprint but it is actually a master positive with seperate magnetic track. Many of the shots are composites from negs. so only exist on the master positive. Link to comment Share on other sites More sharing options...
Premium Member Stephen Williams Posted January 21, 2006 Premium Member Share Posted January 21, 2006 What mean by I need a Rank Cintel (or similar modern equivilent) is that the workprint has many splices in it and would likely not run through a projector type telecine. I say workprint but it is actually a master positive with seperate magnetic track. Many of the shots are composites from negs. so only exist on the master positive. Hi, Splices will jump on any telecine, including a Rank Cintel. It was acceptable for news footage in the past. Stephen Link to comment Share on other sites More sharing options...
dd3stp233 Posted January 21, 2006 Author Share Posted January 21, 2006 Maybe I have the name wrong or something but I'm talking about the scanning kind with no gate. It should not jump because there is no claw or anything. The type I'm refering to wasn't around when they used newsfilm. Link to comment Share on other sites More sharing options...
Brian Drysdale Posted January 21, 2006 Share Posted January 21, 2006 Maybe I have the name wrong or something but I'm talking about the scanning kind with no gate. It should not jump because there is no claw or anything. The type I'm refering to wasn't around when they used newsfilm. The Rank Cintel flying spot TK was around for spliced news footage in Europe. In fact it was used for numerous TV programmes that were shot on reversal and they transmitted edited camera original before video took over. It doesn't jump (in a projector sense), but you do notice the splices passing through. The editors used to clean the film before taking it to the TK. If you've got the neg, it would be better to use that for the final master. Unless, of course, you're just planning to use the workprint to create a viewing video copy for funders etc. Link to comment Share on other sites More sharing options...
Sam Wells Posted January 21, 2006 Share Posted January 21, 2006 The one time I did it with a Cintel (probably a Mk III, not sure) they did sort of jump although I don't think there was a "sync" loss. I'd talk to the facility first. I suspect a Sony Vialta telecine might not jump, don't know... I've actually had this done with a Kodak "TV Pageant" - not a proper telecine but.... it looked fine for my purposes (which were to get a TC window burn & TC track for music syncing & audio, on projects that I cut on film..) BUT be careful as typically this kind of setup -- which is more or less a video camera looking at a projector -- will be using line frequency and NOT blackburst on the projector side (IOW it will be transferring at 24 not 23.976, and the accuracy of the 24 is sort of dependent on your power companies' flywheels... I've gotten away with it tho...) -Sam Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now