jon lawrence Posted February 10, 2007 Share Posted February 10, 2007 Hey, I've finaly decided to invest in a light meter. I thinking of buying a sekonic l-358 as it's fairly cheap and seems to have the features a begginner needs. I've used a light meter before, but I've never measured the distance between the camera and subject. Obviously this is something i need to start doing so my question is where does this come in when using a light meter? I know you have to input the film speed and fps. Where does distance come in and does this anyone know if you can do it with a sekonic l-358? Do you have to input the distance in cm/feet/ metres before you take a reading? Any help would be much appreciated. Thanks, Jon. Link to comment Share on other sites More sharing options...
Premium Member Frank Barrera Posted February 10, 2007 Premium Member Share Posted February 10, 2007 when using an incident light meter you need only place the meter with photosphere towards the camera in the exact spot in which you need the reading. In other words, if you are shooting a subject sitting at a table, you place the meter as close as possible to their face towards the camera's lens. This will give you an averaged reading of the light falling on the subject's face. The distance is not a quantity that you must concern yourself with since you're placing the meter where you desire the reading. Link to comment Share on other sites More sharing options...
jon lawrence Posted February 10, 2007 Author Share Posted February 10, 2007 Thanks alot for clearing that up. My brain feels much better now. Jon Link to comment Share on other sites More sharing options...
Sam Kim Posted February 22, 2007 Share Posted February 22, 2007 if you're a student check out mac on campus. they give decent discounts and i just picked up a new sekonic 758 cine. but there's no need to get such an expensive one unless you need all the functions. picking up a used one from someone you trust might even be worth it (like a cinematography student who wants to upgrade their light meter). try to get something with a spot meter. it's convenient and will really help you out in the long run. you use the incident for the majority and spot check with a spot meter to check your shadows and highlights. Link to comment Share on other sites More sharing options...
Premium Member Francis Kuhn Posted February 22, 2007 Premium Member Share Posted February 22, 2007 I've used a light meter before, but I've never measured the distance between the camera and subject. Obviously this is something i need to start doing so my question is where does this come in when using a light meter? Thanks, Jon. Hi Jon, As explained in the previous post, you really don't need to worry about distance in most shooting situations, but if you start doing a lot of close focus work, you should consider giving additional exposure. From the American Cinematographer Manual (Ninth Edition), page 598: When a lens is focused closer than ten times its focal length, its effective aperture, rather than its marked aperture, must be taken into consideration. When you start focusing close to an object it has the same effect as, say, moving a movie projector farther away from the screen: the size of the image becomes larger, but it also becomes dimmer. There are various charts in the Manual that list the required exposure compensation based on format (16mm/35mm etc.), lens focal length and distance from film to subject. Fran Link to comment Share on other sites More sharing options...
Antonio Bunt Posted February 23, 2007 Share Posted February 23, 2007 This may not be the thread but how about measuring for underwater filming? Thanks! Link to comment Share on other sites More sharing options...
jon lawrence Posted February 25, 2007 Author Share Posted February 25, 2007 Thanks so much for the replies. Can anyone recommend a good light meter? I was going to go for the sekonic l-358 (for £100 on ebay) as it is the cheapest one I can find that works in fps. Are there better ones out there for this kind of money? Thanks, Jon Link to comment Share on other sites More sharing options...
Sam Kim Posted February 27, 2007 Share Posted February 27, 2007 Thanks so much for the replies. Can anyone recommend a good light meter? I was going to go for the sekonic l-358 (for £100 on ebay) as it is the cheapest one I can find that works in fps. Are there better ones out there for this kind of money? Thanks, Jon that'll do if all you want is an incident. if you're taking the used ebay route you might want to save a few more pounds and get a 508 or 558. they have spots built into them. Link to comment Share on other sites More sharing options...
Ian Takahashi SOC Posted March 16, 2007 Share Posted March 16, 2007 This may not be the thread but how about measuring for underwater filming? Thanks! What are you measuring, distance for focus, or light Light is measured the same way, just use a housing on over your meter. You should also double check with a spot-meter, just to see what to see how much light is going to be absorbed by the water as is travels back to your lense. Distance is just the same, with a flat-port everything is 33% bigger, so you focus 25% closer. 12' away, focus at 9'. that'll do if all you want is an incident. if you're taking the used ebay route you might want to save a few more pounds and get a 508 or 558. they have spots built into them. I had a Sekonic 608 for a few years, but now I keep a Minolta F spot meter, and a Spectra IV incident. I like having seperate meters, and they fit into Hydroflex underwater housings. Both are great meters. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now