Tom Hepburn Posted December 19, 2008 Share Posted December 19, 2008 Hello, I have what I believe is a basic question: I have a Lowell Omni light kit that has four 500 watt 120v bulbs/lamps that contain two prongs at the bottom (they are semi spherical, not double ended). I also have four 500 watt (home depot) worklights that I have used in the past prior to getting the Lowells. The bulbs in them are halogen double ended tube shaped lights bulbs. I've noticed that these work lights appear much more yellow even though they are 500 watt halogens. My question is if I purchase "photo" lamps like: http://www.bhphotovideo.com/c/product/1100...#specifications will they be the same color temperature as my Lowells or is that not possible given that they are lights that were not designed for photo/film purposes? Thanks in advance, Tom Link to comment Share on other sites More sharing options...
Tom Hepburn Posted December 22, 2008 Author Share Posted December 22, 2008 Anyone? I'm falling off of the first page. T Link to comment Share on other sites More sharing options...
Kristian Schumacher Posted December 23, 2008 Share Posted December 23, 2008 I am certainly no expert on this, but I would think that the 3100 K temp of the BH bulb in a work lamp would be like 3100 K in any other lamp. Altough 3100 strikes me as a little warm (?) I couldn't see the temperature on the lights at Lowel homepage - probably depends on the bulb...? Oh, well - not that much help....other than bumping you up on the front page ;) Kristian Anyone? I'm falling off of the first page. T Link to comment Share on other sites More sharing options...
JD Hartman Posted December 24, 2008 Share Posted December 24, 2008 (edited) Color temp of the "work light" globes tends to be little lower than that of the equivalent stage and studio globe. If you want globes with a color temp that approaches or matches that of the Omni, you have to buy better quality. Even replacement lamps at HomeDee or Lowes should have the color temp printed on the package. Try Ushio FDF (clear globe) or FDN (frosted), 3200 deg. K. or the equivalent in GE, Radiac, etc. I don't think the GDA lamp will fit in a work light and at $18, it's no bargain. Edited December 24, 2008 by JD Hartman Link to comment Share on other sites More sharing options...
Tom Hepburn Posted December 24, 2008 Author Share Posted December 24, 2008 Thanks Guys. I'll check into those. Tom Link to comment Share on other sites More sharing options...
Alfeo Dixon Posted December 24, 2008 Share Posted December 24, 2008 Also if color is critical, you may want to remove the safety glass infront of the fixture. I remember a few of them having a slight green cast to them. Of course this was back in school shooting table top with a 4x5 on transparency film, so that was major for us. Link to comment Share on other sites More sharing options...
John Dekker Posted December 24, 2008 Share Posted December 24, 2008 Also check the voltage on the bulb. Many standard household and worklight bulbs are actually 130v. It makes them last longer when they are only being fed with 110v. it also makes them warmer in colour. Link to comment Share on other sites More sharing options...
John Dekker Posted December 24, 2008 Share Posted December 24, 2008 Also check the voltage on the bulb. Many standard household and worklight bulbs are actually 130v. It makes them last longer when they are only being fed with 110v. it also makes them warmer in colour. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now