Perrone Ford Posted September 15, 2009 Share Posted September 15, 2009 Hi all, I am looking for something that should be relatively simple. I have some Manfrotto stands (light stands) that came with my light duty background support kit. The top of these does not have a standard baby pin, but rather has a smaller pin with screw threads. In that same kit is the following clamp: While I don't need the background support that often, I do use these stands and clamps as a way to hold flags. What I am looking for is a clamp or something similar that can do the same job with a baby pin, so I can use c-stands or other light stands without this screw-top fitting. I haven't been able to find anything similar. Essentially it should just be a basic clamp that has a baby fitting to allow the flag to be vertical. I have clamps that fit in a gobo head, but sometimes I'd be just fine with a clamp right on the head of the stand. Thanks for any help or info with this. -Perrone Link to comment Share on other sites More sharing options...
Michele Peterson Posted September 17, 2009 Share Posted September 17, 2009 If I understand you right, you want a clamp that you can fix to either the manfrotto pin or a standard baby pin right? If that is right, you should look into the manfrotto super clamp. It will accept manfrotto's pin you are picturing. I think it fits a baby pin as well. Link to comment Share on other sites More sharing options...
Thomas Chaves Posted September 18, 2009 Share Posted September 18, 2009 Hey dude. If I understand correctly, here is what you can get: A Cardellini or Mathellini Clamp If you would like to hand bounceboards or show car, you can also use a Quaker Clamp (AKA Duck-Bill Clamp) Link to comment Share on other sites More sharing options...
Perrone Ford Posted October 28, 2009 Author Share Posted October 28, 2009 Sorry to be so late on this. I don't really care if the clamp fits the Manfrotto stands. I just want it to fit over a baby pin and give me a clamp. A common cardellini won't do this. It HAS a baby pin on it. I need a clamp that accepts a baby pin. Link to comment Share on other sites More sharing options...
JD Hartman Posted November 11, 2009 Share Posted November 11, 2009 Sorry to be so late on this. I don't really care if the clamp fits the Manfrotto stands. I just want it to fit over a baby pin and give me a clamp. A common cardellini won't do this. It HAS a baby pin on it. I need a clamp that accepts a baby pin. You're looking for a clamp, like a pelican, that has a baby reciever instead of a pin? I don't see how it would be useful for holding a bounceboard, flag, net or something similar. There would be little or no flexibility in orienting the object held in the clamp jaws. Link to comment Share on other sites More sharing options...
Perrone Ford Posted November 11, 2009 Author Share Posted November 11, 2009 You're looking for a clamp, like a pelican, that has a baby reciever instead of a pin? I don't see how it would be useful for holding a bounceboard, flag, net or something similar. There would be little or no flexibility in orienting the object held in the clamp jaws. Correct. There would be no flexibility. However, in many instances, when I've got 15 minutes to set up an interview set, simple and fast is welcome. Pop a light stand up, clamp on a bounce board, put up the softbox, focus and shoot. I can toss the clamp(s) in the bag with the stands and have a "fast kit". I realize that this usage won't win any awards, but I am often under serious time pressure to get interviews done sometimes and this would be a welcome solution despite the lack of flexibility. I guess what I want isn't out there, so I'll just have to find another solution. Link to comment Share on other sites More sharing options...
JD Hartman Posted November 12, 2009 Share Posted November 12, 2009 So already owning th clamps which have baby pins attached, you need something to couple two 5/8", baby pin together. Something like: http://www.bhphotovideo.com/c/product/2570..._to_Female.html or: http://www.bhphotovideo.com/c/product/5601...tor_Socket.html If that's what you need, I can fabricate them for you for less than what Bogen wants. Send me a PM and We can discuss the detaisl. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now