Luigi Castellitto Posted December 16, 2015 Share Posted December 16, 2015 1) The viewfinder is slightly colored yellow, but I read in other post of this forum that is normal, that is ONLY the viewfinder and not the lens, and does not affect on the film. 2) You can put Asa intermediate setting? 125, 160, etc.? Although the little setting wheel is made for "click" on standard measures, it does not leave a lot of movement between two of "standard" Asa setting. Or is it better put standard measurment (es. 100 Asa for 125 Asa film) and be a calculation of + or - stop and + or - 1/3 of stop with the internal light meter? 3) The footage counter should also work with less than 30 meters on the reel? I mean only a few meters on the reel. I have a couple of meters of film tests on a reel, but it not move. The internal lever that detects the meter it's ok, it "push" on the reel side. 4) Which way you put the edge of the film in film cutter? Emulsion towards us or towards the machine? Link to comment Share on other sites More sharing options...
Mark Dunn Posted December 16, 2015 Share Posted December 16, 2015 (edited) 1) Mine has a bit of a tint, removing the lens makes no difference. 3) Yes. The feeler system isn't very sensitive. A foot or two may not move it. 4) It doesn't matter. Edited December 16, 2015 by Mark Dunn Link to comment Share on other sites More sharing options...
Luigi Castellitto Posted December 16, 2015 Author Share Posted December 16, 2015 Thank you, Mark! 2) You as you adjust for that? 4) I wondered why it seemed to me that the cut of film cutter was slightly oblique. Or not... As it would be better to cut the film to be inserted: straight, oblique with the tip down or oblique with the tip on top? Link to comment Share on other sites More sharing options...
Mark Dunn Posted December 17, 2015 Share Posted December 17, 2015 (edited) I don't know about the meter. Mine doesn't work. The idea is to cut through a perf to help it engage the sprocket. Have you seen my Youtube video? I prefer to load by hand. Edited December 17, 2015 by Mark Dunn Link to comment Share on other sites More sharing options...
Luigi Castellitto Posted December 19, 2015 Author Share Posted December 19, 2015 (edited) I don't know about the meter. Mine doesn't work. The idea is to cut through a perf to help it engage the sprocket. Have you seen my Youtube video? I prefer to load by hand. Ah, I had not seen, it'is a very fast and precise loading. I, however, still have the loop formers. One day I think to remove them, for now the camera is new and I would not even do this. I'll have to do it because, in the loading moment, the claw, 90% of the time, does not hook the hole of film, and I do the operation of removal pressure plate and slide the film for engaging the claw in the claw. Perhaps, without the loop formers not happen. Edited December 19, 2015 by mbaarviao Link to comment Share on other sites More sharing options...
Luigi Castellitto Posted December 26, 2015 Author Share Posted December 26, 2015 For various K-3 users on the forum: I can set 64 Asa (fuji f-64d 16 mm) on the knob on the K-3? I know I could use an external lightmeter, but the one in my camera works perfectly and I would use it. I have to set 50 or 100, and do calculations with the stops? I can't understand if the knob of Asa has values of intermediate sensitivity. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now