Justin Skrundz Posted June 12, 2017 Share Posted June 12, 2017 Hello,I'm slightly confused about the door on my Arri 3. It has a spot for a video tap but I don't know what CCD cameras will fit it. It sort of looks like a bayonet style. I've found some online but I have no way of knowing if they'll mount. Anyone know where I could get one? Link to comment Share on other sites More sharing options...
Gregg MacPherson Posted June 13, 2017 Share Posted June 13, 2017 I have an original Arnold and Richter video tap for an Arri 3 door. It's quite bulky. There is a male thread about 35 or 36mm at the 2/3" sensor. Canon 4 pin power connector and BNC signal out. I didn't check if it's working yet. Link to comment Share on other sites More sharing options...
Justin Skrundz Posted June 14, 2017 Author Share Posted June 14, 2017 I have an original Arnold and Richter video tap for an Arri 3 door. It's quite bulky. There is a male thread about 35 or 36mm at the 2/3" sensor. Canon 4 pin power connector and BNC signal out. I didn't check if it's working yet. Would you be willing to sell it? B/W I assume? Link to comment Share on other sites More sharing options...
Gregg MacPherson Posted June 16, 2017 Share Posted June 16, 2017 I haven't used it myself. My guess is, yes B&W, probably PAL. I probably don't have the knowledge or resources to check it properly. I powered it up, held a lens in front and it sent a signal to an NTSC monitor, basically a rolling frame line. I don't have a PAL monitor at the moment. NZ is a PAL country and I'm guessng that this ex National Film Unit video tap is sending PAL. We can chat via email...viz(at)xtra.co.nz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now